Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/evbarm/conf Remove BEAGLEBONE kernel config (AM335x...
details: https://anonhg.NetBSD.org/src/rev/1fdb2db5d415
branches: trunk
changeset: 460622:1fdb2db5d415
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Mon Oct 28 22:24:56 2019 +0000
description:
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
diffstat:
sys/arch/evbarm/conf/BEAGLEBONE | 186 --------------------------------
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL | 11 -
sys/arch/evbarm/conf/README.evbarm | 3 +-
3 files changed, 1 insertions(+), 199 deletions(-)
diffs (222 lines):
diff -r ed506c7236a2 -r 1fdb2db5d415 sys/arch/evbarm/conf/BEAGLEBONE
--- a/sys/arch/evbarm/conf/BEAGLEBONE Mon Oct 28 22:23:51 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,186 +0,0 @@
-#
-# $NetBSD: BEAGLEBONE,v 1.48 2019/05/18 08:49:23 skrll Exp $
-#
-# BEAGLEBONE -- TI AM335x board Kernel
-#
-
-include "arch/evbarm/conf/std.beagle"
-include "arch/evbarm/conf/GENERIC.common"
-
-# CPU options
-
-options CPU_CORTEXA8
-options TI_AM335X
-
-# XXX The Cortex PMC delay() doesn't seem to work.
-#no options CORTEX_PMC
-
-# Architecture options
-#makeoptions CPUFLAGS+="-mthumb"
-
-# Development and Debugging options
-
-options DEBUG
-makeoptions DEBUG="-g" # compile full symbol table
-makeoptions COPY_SYMTAB=1
-
-#options VERBOSE_INIT_ARM
-#options EARLYCONS=beagle # CONSADDR set below
-
-## USB Debugging options
-options USB_DEBUG
-options EHCI_DEBUG
-options OHCI_DEBUG
-options UHUB_DEBUG
-
-
-# Valid options for BOOT_ARGS:
-# single Boot to single user only
-# kdb Give control to kernel debugger
-# ask Ask for file name to reboot from
-# pmapdebug=<n> If PMAP_DEBUG, set pmap_debug_level to <n>
-# memorydisk=<n> Set memorydisk size to <n> KB
-# quiet Show aprint_naive output
-# verbose Show aprint_normal and aprint_verbose output
-options BOOT_ARGS="\"-v\""
-
-config netbsd root on ? type ?
-
-# The main bus device
-mainbus0 at root
-
-# The boot cpu
-cpu0 at mainbus?
-
-# Specify the memory size in megabytes.
-#options MEMSIZE=256
-
-# L3 Interconnect
-#L3i0 at mainbus?
-
-# OBIO
-obio0 at mainbus? base 0x44c00000 size 0x00400000 # L4_WKUP
-obio1 at mainbus? base 0x48000000 size 0x01000000 # L4_PER
-obio2 at mainbus? base 0x4a000000 size 0x01000000 # L4_FAST
-
-# Enhanced Direct Memory Access controller
-edma0 at mainbus? base 0x49000000 size 0x100000 intrbase 12
-
-# General Purpose Memory Controller
-gpmc0 at mainbus? base 0x50000000
-
-# Interrupt Controller
-omapicu0 at obio1 addr 0x48200000 size 0x1000 intrbase 0
-
-# Power, Reset and Clock Management
-prcm0 at obio0 addr 0x44e00000 size 0x2000 # PRM Module
-
-# Control Module
-sitaracm0 at obio0 addr 0x44e10000 size 0x2000
-
-# SDHC controllers
-sdhc0 at obio1 addr 0x48060000 size 0x1000 intr 64 edmabase 24
-sdmmc0 at sdhc0
-ld0 at sdmmc0
-sdhc1 at obio1 addr 0x481d8000 size 0x1000 intr 28 edmabase 2 # BB Black
-sdmmc1 at sdhc1
-ld1 at sdmmc1
-#sdhc2 at obio0 addr 0x47810000 size 0x1000 intr 29
-#sdmmc2 at sdhc2
-#ld2 at sdmmc2
-sdmmc* at sdhc? # SD/MMC bus
-ld* at sdmmc?
-#options SDMMC_DEBUG
-#options SDHC_DEBUG
-
-# General-purpose I/O pins
-omapgpio0 at obio0 addr 0x44e07000 size 0x1000 # intrbase 128 intr 29
-gpio0 at omapgpio0
-omapgpio1 at obio1 addr 0x4804c000 size 0x1000 # intrbase 160 intr 30
-gpio1 at omapgpio1
-omapgpio2 at obio1 addr 0x481ac000 size 0x1000 # intrbase 192 intr 32
-gpio2 at omapgpio2
-omapgpio3 at obio1 addr 0x481ae000 size 0x1000 # intrbase 224 intr 32
-gpio3 at omapgpio3
-gpio* at gpiobus?
-
-# I2C Controller
-tiiic0 at obio0 addr 0x44e0b000 size 0x1000 intr 70
-iic* at tiiic?
-seeprom* at iic0 addr 0x50 flags 256 # 32768 bytes
-tps65217pmic* at iic0 addr 0x24
-
-# On-board 16550 UARTs
-com0 at obio0 addr 0x44e09000 size 0x1000 intr 72 mult 4 # UART0
-options CONSADDR=0x44e09000, CONSPEED=115200
-
-# XXX Clock assignment is kinda random. My DM timer 3 seems to be
-# unhappy and I don't know why. DM timer 0 doesn't seem to deliver
-# interrupts for the hard clock, although it seems to be the obvious
-# choice.
-
-# Hardclock timer
-omapdmtimer0 at obio1 addr 0x48040000 size 0x1000 intr 68 # DM Timer 2
-
-# Time counter
-omapdmtimer1 at obio0 addr 0x44e31000 size 0x1000 intr 67 # DM Timer 1ms
-
-# Statclock timer
-omapdmtimer2 at obio1 addr 0x48044000 size 0x1000 intr 92 # DM Timer 4
-
-# Watchdog timers
-omapwdt32k* at obio0 addr 0x44e35000 size 0x1000 # WDT1
-
-# Random number generator
-trng* at obio1 addr 0x48310000 size 0x2000 intr 111 # TRNG
-
-# onboard video, experimental. Video mode is hardcoded in the driver
-#tifb* at obio1 addr 0x4830E000 size 0x1000 intr 36
-
-# make sure the console display is always wsdisplay0
-#wsdisplay* at wsemuldisplaydev?
-
-# various options for wscons - we try to look as much like a standard
-# sun console as possible
-#options WSEMUL_VT100
-#options WSDISPLAY_COMPAT_PCVT
-#options WSDISPLAY_COMPAT_SYSCONS
-#options WSDISPLAY_COMPAT_USL
-#options WSDISPLAY_SCROLLSUPPORT
-#options WS_KERNEL_FG=WSCOL_GREEN
-#options WSDISPLAY_DEFAULTSCREENS=4
-#options FONT_GALLANT12x22
-#options FONT_BOLD8x16
-# compatibility to other console drivers
-#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
-
-pseudo-device wsmux # mouse & keyboard multiplexor
-pseudo-device wsfont
-
-# On-board USB. Experimental
-tiotg* at mainbus? base 0x47400000 size 0x5000 intrbase 17
-motg* at tiotg? port ?
-usb* at motg?
-
-# USB device drivers
-include "dev/usb/usbdevices.config"
-
-# needed for umidi
-midi* at midibus?
-
-# SCSI bus support
-scsibus* at scsi?
-# SCSI devices
-sd* at scsibus? target ? lun ? # SCSI disk drives
-
-# Ethernet
-cpsw* at obio2 addr 0x4a100000 size 0x8000 intrbase 40
-
-rgephy* at mii? phy ?
-rlphy* at mii? phy ?
-ukphy* at mii? phy ?
-
-# Pseudo-Devices
-
-# local configuration
-cinclude "arch/evbarm/conf/BEAGLEBONE.local"
diff -r ed506c7236a2 -r 1fdb2db5d415 sys/arch/evbarm/conf/BEAGLEBONE_INSTALL
--- a/sys/arch/evbarm/conf/BEAGLEBONE_INSTALL Mon Oct 28 22:23:51 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,11 +0,0 @@
-# $NetBSD: BEAGLEBONE_INSTALL,v 1.2 2014/05/01 18:43:45 martin Exp $
-#
-# BEAGLEBONE_INSTALL -- BEAGLEBONE kernel with installation-sized
-# ramdisk
-#
-
-include "arch/evbarm/conf/BEAGLEBONE"
-include "arch/evbarm/conf/INSTALL"
-
-options BOOTHOWTO=RB_SINGLE
-no makeoptions DEBUG
diff -r ed506c7236a2 -r 1fdb2db5d415 sys/arch/evbarm/conf/README.evbarm
--- a/sys/arch/evbarm/conf/README.evbarm Mon Oct 28 22:23:51 2019 +0000
+++ b/sys/arch/evbarm/conf/README.evbarm Mon Oct 28 22:24:56 2019 +0000
@@ -1,4 +1,4 @@
-$NetBSD: README.evbarm,v 1.21 2019/03/31 13:04:54 jmcneill Exp $
+$NetBSD: README.evbarm,v 1.22 2019/10/28 22:24:56 jmcneill Exp $
config date boards
-------------------------------------------------------------------------------
@@ -8,7 +8,6 @@
BCM5301X 2012/08/31 Broadcom BCM95301X evaluation/reference board
BEAGLEBOARD 2008/10/22 TI OMAP3530 BeagleBoard
BEAGLEBOARDXM 2008/08/20 TI DM37xx BeagleBoard-XM
-BEAGLEBONE 2012/08/20 TI AM335x BeagleBone
CUBOX 2017/01/07 SolidRun Cubox
CP3100 2006/11/08 Certance IOP321 CP-3100
DEVKIT8000 2010/09/08 Embest OMAP3530 DevKit8000 eval Kit
Home |
Main Index |
Thread Index |
Old Index