Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/arm/sunxi The mmc module clock needs to be doubled ...



details:   https://anonhg.NetBSD.org/src/rev/1c9cb15303fd
branches:  trunk
changeset: 454114:1c9cb15303fd
user:      bouyer <bouyer%NetBSD.org@localhost>
date:      Thu Sep 05 17:25:23 2019 +0000

description:
The mmc module clock needs to be doubled only for 8bits DDR mode on old
timing hardware.
This makes the lime2-eemc works in 4bits DDR52 mode.

diffstat:

 sys/arch/arm/sunxi/sunxi_mmc.c |  21 ++++++++++++++-------
 1 files changed, 14 insertions(+), 7 deletions(-)

diffs (79 lines):

diff -r e4170d4a9c8f -r 1c9cb15303fd sys/arch/arm/sunxi/sunxi_mmc.c
--- a/sys/arch/arm/sunxi/sunxi_mmc.c    Thu Sep 05 16:19:16 2019 +0000
+++ b/sys/arch/arm/sunxi/sunxi_mmc.c    Thu Sep 05 17:25:23 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sunxi_mmc.c,v 1.36 2019/09/01 15:02:17 jmcneill Exp $ */
+/* $NetBSD: sunxi_mmc.c,v 1.37 2019/09/05 17:25:23 bouyer Exp $ */
 
 /*-
  * Copyright (c) 2014-2017 Jared McNeill <jmcneill%invisible.ca@localhost>
@@ -29,7 +29,7 @@
 #include "opt_sunximmc.h"
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: sunxi_mmc.c,v 1.36 2019/09/01 15:02:17 jmcneill Exp $");
+__KERNEL_RCSID(0, "$NetBSD: sunxi_mmc.c,v 1.37 2019/09/05 17:25:23 bouyer Exp $");
 
 #include <sys/param.h>
 #include <sys/bus.h>
@@ -481,7 +481,7 @@
 }
 
 static int
-sunxi_mmc_set_clock(struct sunxi_mmc_softc *sc, u_int freq, bool ddr)
+sunxi_mmc_set_clock(struct sunxi_mmc_softc *sc, u_int freq, bool ddr, bool dbl)
 {
        const struct sunxi_mmc_delay *delays;
        int error, timing = SUNXI_MMC_TIMING_400K;
@@ -507,7 +507,7 @@
                        return EINVAL;
        }
 
-       error = clk_set_rate(sc->sc_clk_mmc, (freq * 1000) << ddr);
+       error = clk_set_rate(sc->sc_clk_mmc, (freq * 1000) << dbl);
        if (error != 0)
                return error;
 
@@ -555,7 +555,7 @@
 
        sunxi_mmc_host_reset(sc);
        sunxi_mmc_bus_width(sc, 1);
-       sunxi_mmc_set_clock(sc, 400, false);
+       sunxi_mmc_set_clock(sc, 400, false, false);
 
        if (sc->sc_pwrseq)
                fdtbus_mmc_pwrseq_post_power_on(sc->sc_pwrseq);
@@ -817,6 +817,7 @@
        struct sunxi_mmc_softc *sc = sch;
        uint32_t clkcr, gctrl, ntsr;
        const u_int flags = sc->sc_config->flags;
+       bool dbl = 0;
 
        clkcr = MMC_READ(sc, SUNXI_MMC_CLKCR);
        if (clkcr & SUNXI_MMC_CLKCR_CARDCLKON) {
@@ -834,9 +835,15 @@
        }
 
        if (freq) {
+               /* For 8bits ddr in old timing modes, and all ddr in new
+                * timing modes, the module clock has to be 2x the card clock.
+                */
+               if (ddr && ((flags & SUNXI_MMC_FLAG_NEW_TIMINGS) ||
+                   sc->sc_mmc_width == 8))
+                       dbl = 1;
 
                clkcr &= ~SUNXI_MMC_CLKCR_DIV;
-               clkcr |= __SHIFTIN(ddr, SUNXI_MMC_CLKCR_DIV);
+               clkcr |= __SHIFTIN(dbl, SUNXI_MMC_CLKCR_DIV);
                MMC_WRITE(sc, SUNXI_MMC_CLKCR, clkcr);
 
                if (flags & SUNXI_MMC_FLAG_NEW_TIMINGS) {
@@ -858,7 +865,7 @@
                        gctrl &= ~SUNXI_MMC_GCTRL_DDR_MODE;
                MMC_WRITE(sc, SUNXI_MMC_GCTRL, gctrl);
 
-               if (sunxi_mmc_set_clock(sc, freq, ddr) != 0)
+               if (sunxi_mmc_set_clock(sc, freq, ddr, dbl) != 0)
                        return 1;
 
                clkcr |= SUNXI_MMC_CLKCR_CARDCLKON;



Home | Main Index | Thread Index | Old Index