Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/netbsd-8]: src/sys/dev/scsipi Pull up following revision(s) (requested b...



details:   https://anonhg.NetBSD.org/src/rev/df7cd863a738
branches:  netbsd-8
changeset: 434838:df7cd863a738
user:      snj <snj%NetBSD.org@localhost>
date:      Sun Apr 08 06:11:41 2018 +0000

description:
Pull up following revision(s) (requested by mlelstv in ticket #703):
        sys/dev/scsipi/st.c: 1.234
        sys/dev/scsipi/stvar.h: 1.26
Use separate lock to protect internal state and release locks when
calling biodone.

diffstat:

 sys/dev/scsipi/st.c    |  316 +++++++++++++++++++++++++++---------------------
 sys/dev/scsipi/stvar.h |    5 +-
 2 files changed, 183 insertions(+), 138 deletions(-)

diffs (truncated from 463 to 300 lines):

diff -r cc0f3fc0cf50 -r df7cd863a738 sys/dev/scsipi/st.c
--- a/sys/dev/scsipi/st.c       Sun Apr 08 06:10:24 2018 +0000
+++ b/sys/dev/scsipi/st.c       Sun Apr 08 06:11:41 2018 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: st.c,v 1.230.8.1 2017/06/21 18:18:55 snj Exp $ */
+/*     $NetBSD: st.c,v 1.230.8.2 2018/04/08 06:11:41 snj Exp $ */
 
 /*-
  * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
@@ -50,7 +50,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: st.c,v 1.230.8.1 2017/06/21 18:18:55 snj Exp $");
+__KERNEL_RCSID(0, "$NetBSD: st.c,v 1.230.8.2 2018/04/08 06:11:41 snj Exp $");
 
 #ifdef _KERNEL_OPT
 #include "opt_scsi.h"
@@ -343,6 +343,7 @@
 static void    st_unmount(struct st_softc *, boolean);
 static int     st_decide_mode(struct st_softc *, boolean);
 static void    ststart(struct scsipi_periph *);
+static int     ststart1(struct scsipi_periph *, struct buf *);
 static void    strestart(void *);
 static void    stdone(struct scsipi_xfer *, int);
 static int     st_read(struct st_softc *, char *, int, int);
@@ -392,9 +393,11 @@
        /* Set initial flags  */
        st->flags = ST_INIT_FLAGS;
 
-       /* Set up the buf queue for this device */
+       /* Set up the buf queues for this device */
        bufq_alloc(&st->buf_queue, "fcfs", 0);
+       bufq_alloc(&st->buf_defer, "fcfs", 0);
        callout_init(&st->sc_callout, 0);
+       mutex_init(&st->sc_iolock, MUTEX_DEFAULT, IPL_VM);
 
        /*
         * Check if the drive is a known criminal and take
@@ -445,6 +448,7 @@
        mutex_enter(chan_mtx(chan));
 
        /* Kill off any queued buffers. */
+       bufq_drain(st->buf_defer);
        bufq_drain(st->buf_queue);
 
        /* Kill off any pending commands. */
@@ -452,7 +456,9 @@
 
        mutex_exit(chan_mtx(chan));
 
+       bufq_free(st->buf_defer);
        bufq_free(st->buf_queue);
+       mutex_destroy(&st->sc_iolock);
 
        /* Nuke the vnodes for any open instances */
        mn = STUNIT(device_unit(self));
@@ -609,6 +615,8 @@
                 */
                if ((st->flags & ST_MOUNTED) || ST_MOUNT_DELAY == 0 ||
                    (st->mt_key != SKEY_NOT_READY)) {
+                       device_printf(st->sc_dev, "mount error (key=%d)\n",
+                               st->mt_key);
                        goto bad;
                }
 
@@ -629,11 +637,11 @@
 
                periph->periph_flags = oflags;  /* restore flags */
                if (slpintr != 0 && slpintr != EWOULDBLOCK) {
+                       device_printf(st->sc_dev, "load interrupted\n");
                        goto bad;
                }
        }
 
-
        /*
         * If the mode is 3 (e.g. minor = 3,7,11,15) then the device has
         * been opened to set defaults and perform other, usually non-I/O
@@ -642,7 +650,9 @@
         * as to whether or not we got a NOT READY for the above
         * unit attention). If a tape is there, go do a mount sequence.
         */
-       if (stmode == CTRL_MODE && st->mt_key == SKEY_NOT_READY) {
+       if (stmode == CTRL_MODE &&
+           st->mt_key != SKEY_NO_SENSE &&
+           st->mt_key != SKEY_UNIT_ATTENTION) {
                periph->periph_flags |= PERIPH_OPEN;
                return 0;
        }
@@ -1107,160 +1117,187 @@
 
 /*
  * ststart looks to see if there is a buf waiting for the device
- * and that the device is not already busy. If both are true,
- * It dequeues the buf and creates a scsi command to perform the
- * transfer required. The transfer request will call scsipi_done
- * on completion, which will in turn call this routine again
- * so that the next queued transfer is performed.
- * The bufs are queued by the strategy routine (ststrategy)
+ * and that the device is not already busy. If the device is busy,
+ * the request is deferred and retried on the next attempt.
+ * If both are true, ststart creates a scsi command to perform
+ * the transfer required.
+ *
+ * The transfer request will call scsipi_done on completion,
+ * which will in turn call this routine again so that the next
+ * queued transfer is performed. The bufs are queued by the
+ * strategy routine (ststrategy)
  *
  * This routine is also called after other non-queued requests
  * have been made of the scsi driver, to ensure that the queue
  * continues to be drained.
  * ststart() is called with channel lock held
  */
+static int
+ststart1(struct scsipi_periph *periph, struct buf *bp)
+{
+       struct st_softc *st = device_private(periph->periph_dev);
+        struct scsipi_channel *chan = periph->periph_channel;
+       struct scsi_rw_tape cmd;
+       struct scsipi_xfer *xs;
+       int flags, error;
+
+       SC_DEBUG(periph, SCSIPI_DB2, ("ststart1 "));
+
+       mutex_enter(chan_mtx(chan));
+
+       if (periph->periph_active >= periph->periph_openings) {
+               error = EAGAIN;
+               goto out;
+       }
+
+       /* if a special awaits, let it proceed first */
+       if (periph->periph_flags & PERIPH_WAITING) {
+               periph->periph_flags &= ~PERIPH_WAITING;
+               cv_broadcast(periph_cv_periph(periph));
+               error = EAGAIN;
+               goto out;
+       }
+
+       /*
+        * If the device has been unmounted by the user
+        * then throw away all requests until done.
+        */
+       if (__predict_false((st->flags & ST_MOUNTED) == 0 ||
+           (periph->periph_flags & PERIPH_MEDIA_LOADED) == 0)) {
+               error = EIO;
+               goto out;
+       }
+
+       /*
+        * only FIXEDBLOCK devices have pending I/O or space operations.
+        */
+       if (st->flags & ST_FIXEDBLOCKS) {
+               /*
+                * If we are at a filemark but have not reported it yet
+                * then we should report it now
+                */
+               if (st->flags & ST_AT_FILEMARK) {
+                       if ((bp->b_flags & B_READ) == B_WRITE) {
+                               /*
+                                * Handling of ST_AT_FILEMARK in
+                                * st_space will fill in the right file
+                                * mark count.
+                                * Back up over filemark
+                                */
+                               if (st_space(st, 0, SP_FILEMARKS, 0)) {
+                                       error = EIO;
+                                       goto out;
+                               }
+                       } else {
+                               bp->b_resid = bp->b_bcount;
+                               error = 0;
+                               st->flags &= ~ST_AT_FILEMARK;
+                               goto out;
+                       }
+               }
+       }
+       /*
+        * If we are at EOM but have not reported it
+        * yet then we should report it now.
+        */
+       if (st->flags & (ST_EOM_PENDING|ST_EIO_PENDING)) {
+               error = EIO;
+               goto out;
+       }
+
+       /* Fill out the scsi command */
+       memset(&cmd, 0, sizeof(cmd));
+       flags = XS_CTL_NOSLEEP | XS_CTL_ASYNC;
+       if ((bp->b_flags & B_READ) == B_WRITE) {
+               cmd.opcode = WRITE;
+               st->flags &= ~ST_FM_WRITTEN;
+               flags |= XS_CTL_DATA_OUT;
+       } else {
+               cmd.opcode = READ;
+               flags |= XS_CTL_DATA_IN;
+       }
+
+       /*
+        * Handle "fixed-block-mode" tape drives by using the
+        * block count instead of the length.
+        */
+       if (st->flags & ST_FIXEDBLOCKS) {
+               cmd.byte2 |= SRW_FIXED;
+               _lto3b(bp->b_bcount / st->blksize, cmd.len);
+       } else
+               _lto3b(bp->b_bcount, cmd.len);
+
+       /* Clear 'position updated' indicator */
+       st->flags &= ~ST_POSUPDATED;
+
+       /* go ask the adapter to do all this for us */
+       xs = scsipi_make_xs_locked(periph,
+           (struct scsipi_generic *)&cmd, sizeof(cmd),
+           (u_char *)bp->b_data, bp->b_bcount,
+           0, ST_IO_TIME, bp, flags);
+       if (__predict_false(xs == NULL)) {
+               /*
+                * out of memory. Keep this buffer in the queue, and
+                * retry later.
+                */
+               callout_reset(&st->sc_callout, hz / 2, strestart,
+                   periph);
+               error = EAGAIN;
+               goto out;
+       }
+
+       error = scsipi_execute_xs(xs);
+       /* with a scsipi_xfer preallocated, scsipi_command can't fail */
+       KASSERT(error == 0);
+
+out:
+       mutex_exit(chan_mtx(chan));
+
+       return error;
+}
+
 static void
 ststart(struct scsipi_periph *periph)
 {
        struct st_softc *st = device_private(periph->periph_dev);
+        struct scsipi_channel *chan = periph->periph_channel;
        struct buf *bp;
-       struct scsi_rw_tape cmd;
-       struct scsipi_xfer *xs;
-       int flags, error __diagused;
+       int error;
 
        SC_DEBUG(periph, SCSIPI_DB2, ("ststart "));
-       /* See if there is a buf to do and we are not already  doing one */
-       while (periph->periph_active < periph->periph_openings) {
-               /* if a special awaits, let it proceed first */
-               if (periph->periph_flags & PERIPH_WAITING) {
-                       periph->periph_flags &= ~PERIPH_WAITING;
-                       cv_broadcast(periph_cv_periph(periph));
-                       return;
-               }
 
-               /*
-                * If the device has been unmounted by the user
-                * then throw away all requests until done.
-                */
-               if (__predict_false((st->flags & ST_MOUNTED) == 0 ||
-                   (periph->periph_flags & PERIPH_MEDIA_LOADED) == 0)) {
-                       if ((bp = bufq_get(st->buf_queue)) != NULL) {
-                               /* make sure that one implies the other.. */
-                               periph->periph_flags &= ~PERIPH_MEDIA_LOADED;
-                               bp->b_error = EIO;
-                               bp->b_resid = bp->b_bcount;
-                               biodone(bp);
-                               continue;
-                       } else
-                               return;
-               }
+       mutex_exit(chan_mtx(chan));
+       mutex_enter(&st->sc_iolock);
 
-               if ((bp = bufq_peek(st->buf_queue)) == NULL)
-                       return;
+       while ((bp = bufq_get(st->buf_defer)) != NULL
+              || (bp = bufq_get(st->buf_queue)) != NULL) {
 
                iostat_busy(st->stats);
+               mutex_exit(&st->sc_iolock);
 
-               /*
-                * only FIXEDBLOCK devices have pending I/O or space operations.
-                */
-               if (st->flags & ST_FIXEDBLOCKS) {
-                       /*
-                        * If we are at a filemark but have not reported it yet
-                        * then we should report it now
-                        */
-                       if (st->flags & ST_AT_FILEMARK) {
-                               if ((bp->b_flags & B_READ) == B_WRITE) {
-                                       /*
-                                        * Handling of ST_AT_FILEMARK in
-                                        * st_space will fill in the right file



Home | Main Index | Thread Index | Old Index