Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/arm/sunxi disable all clocks at end of attach funct...
details: https://anonhg.NetBSD.org/src/rev/8ce59926e26a
branches: trunk
changeset: 360863:8ce59926e26a
user: bouyer <bouyer%NetBSD.org@localhost>
date: Tue Apr 03 16:17:59 2018 +0000
description:
disable all clocks at end of attach function, and re-enable ahb and mod only
in activate function.
enable ram gate (in debe) and video plls (in tcon) only when the video output
is enabled. Saves about 20mw when both video outputs are off.
diffstat:
sys/arch/arm/sunxi/sunxi_debe.c | 29 +++++++++++++++++++++++++----
sys/arch/arm/sunxi/sunxi_hdmi.c | 13 +++++++++++--
sys/arch/arm/sunxi/sunxi_tcon.c | 33 +++++++++++++++++++++++++++++++--
3 files changed, 67 insertions(+), 8 deletions(-)
diffs (225 lines):
diff -r 8696b90c599b -r 8ce59926e26a sys/arch/arm/sunxi/sunxi_debe.c
--- a/sys/arch/arm/sunxi/sunxi_debe.c Tue Apr 03 16:01:25 2018 +0000
+++ b/sys/arch/arm/sunxi/sunxi_debe.c Tue Apr 03 16:17:59 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sunxi_debe.c,v 1.4 2018/04/03 13:38:13 bouyer Exp $ */
+/* $NetBSD: sunxi_debe.c,v 1.5 2018/04/03 16:17:59 bouyer Exp $ */
/*-
* Copyright (c) 2018 Manuel Bouyer <bouyer%antioche.eu.org@localhost>
@@ -38,7 +38,7 @@
#define SUNXI_DEBE_CURMAX 64
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: sunxi_debe.c,v 1.4 2018/04/03 13:38:13 bouyer Exp $");
+__KERNEL_RCSID(0, "$NetBSD: sunxi_debe.c,v 1.5 2018/04/03 16:17:59 bouyer Exp $");
#include <sys/param.h>
#include <sys/bus.h>
@@ -204,11 +204,13 @@
}
if (clk_enable(sc->sc_clk_ahb) != 0 ||
- clk_enable(sc->sc_clk_mod) != 0 ||
- clk_enable(sc->sc_clk_ram) != 0) {
+ clk_enable(sc->sc_clk_mod) != 0) {
aprint_error(": couldn't enable clocks\n");
return;
}
+ if (clk_disable(sc->sc_clk_ram) != 0) {
+ aprint_error(": couldn't disable ram clock\n");
+ }
sc->sc_type = of_search_compatible(faa->faa_phandle, compat_data)->data;
@@ -278,6 +280,12 @@
#ifdef AWIN_DEBE_FWINIT
sunxi_debe_set_videomode(device_unit(self), &mode);
sunxi_debe_enable(device_unit(self), true);
+#else
+ if (clk_disable(sc->sc_clk_ahb) != 0 ||
+ clk_disable(sc->sc_clk_mod) != 0) {
+ aprint_error(": couldn't disable clocks\n");
+ return;
+ }
#endif
}
@@ -520,6 +528,10 @@
sc = device_private(dev);
if (enable) {
+ if (clk_enable(sc->sc_clk_ram) != 0) {
+ device_printf(dev,
+ ": warning: failed to enable ram clock\n");
+ }
val = DEBE_READ(sc, SUNXI_DEBE_REGBUFFCTL_REG);
val |= SUNXI_DEBE_REGBUFFCTL_REGLOADCTL;
DEBE_WRITE(sc, SUNXI_DEBE_REGBUFFCTL_REG, val);
@@ -534,6 +546,10 @@
val = DEBE_READ(sc, SUNXI_DEBE_MODCTL_REG);
val &= ~SUNXI_DEBE_MODCTL_START_CTL;
DEBE_WRITE(sc, SUNXI_DEBE_MODCTL_REG, val);
+ if (clk_disable(sc->sc_clk_ram) != 0) {
+ device_printf(dev,
+ ": warning: failed to disable ram clock\n");
+ }
}
#if 0
for (int i = 0; i < 0x1000; i += 4) {
@@ -860,6 +876,11 @@
break;
}
aprint_normal("activate %s\n", device_xname(dev));
+ if (clk_enable(sc->sc_clk_ahb) != 0 ||
+ clk_enable(sc->sc_clk_mod) != 0) {
+ aprint_error_dev(dev, "couldn't enable clocks\n");
+ return EIO;
+ }
/* connect debd0 to tcon0, debe1 to tcon1 */
ep = fdt_endpoint_get_from_index(&sc->sc_ports, SUNXI_PORT_OUTPUT,
sc->sc_unit);
diff -r 8696b90c599b -r 8ce59926e26a sys/arch/arm/sunxi/sunxi_hdmi.c
--- a/sys/arch/arm/sunxi/sunxi_hdmi.c Tue Apr 03 16:01:25 2018 +0000
+++ b/sys/arch/arm/sunxi/sunxi_hdmi.c Tue Apr 03 16:17:59 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sunxi_hdmi.c,v 1.2 2018/04/03 13:38:13 bouyer Exp $ */
+/* $NetBSD: sunxi_hdmi.c,v 1.3 2018/04/03 16:17:59 bouyer Exp $ */
/*-
* Copyright (c) 2014 Jared D. McNeill <jmcneill%invisible.ca@localhost>
@@ -29,7 +29,7 @@
#include "opt_ddb.h"
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: sunxi_hdmi.c,v 1.2 2018/04/03 13:38:13 bouyer Exp $");
+__KERNEL_RCSID(0, "$NetBSD: sunxi_hdmi.c,v 1.3 2018/04/03 16:17:59 bouyer Exp $");
#include <sys/param.h>
#include <sys/bus.h>
@@ -237,6 +237,10 @@
mutex_init(&sc->sc_pwr_lock, MUTEX_DEFAULT, IPL_NONE);
sunxi_hdmi_i2c_init(sc);
+ if (clk_disable(sc->sc_clk_ahb) != 0) {
+ aprint_error(": couldn't disable ahb clock\n");
+ return;
+ }
}
static void
@@ -580,6 +584,10 @@
int error;
uint32_t dbg0_reg;
+ if (clk_enable(sc->sc_clk_ahb) != 0) {
+ aprint_error_dev(sc->sc_dev, "couldn't enable ahb clock\n");
+ return;
+ }
/* assume tcon0 uses pll3, tcon1 uses pll7 */
switch(fdt_endpoint_index(sc->sc_in_ep)) {
case 0:
@@ -805,6 +813,7 @@
uint32_t val;
fdt_endpoint_enable(sc->sc_out_ep, enable);
+
val = HDMI_READ(sc, SUNXI_HDMI_VID_CTRL_REG);
val &= ~SUNXI_HDMI_VID_CTRL_SRC_SEL;
#ifdef SUNXI_HDMI_CBGEN
diff -r 8696b90c599b -r 8ce59926e26a sys/arch/arm/sunxi/sunxi_tcon.c
--- a/sys/arch/arm/sunxi/sunxi_tcon.c Tue Apr 03 16:01:25 2018 +0000
+++ b/sys/arch/arm/sunxi/sunxi_tcon.c Tue Apr 03 16:17:59 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sunxi_tcon.c,v 1.2 2018/04/03 13:38:13 bouyer Exp $ */
+/* $NetBSD: sunxi_tcon.c,v 1.3 2018/04/03 16:17:59 bouyer Exp $ */
/*-
* Copyright (c) 2018 Manuel Bouyer <bouyer%antioche.eu.org@localhost>
@@ -30,7 +30,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: sunxi_tcon.c,v 1.2 2018/04/03 13:38:13 bouyer Exp $");
+__KERNEL_RCSID(0, "$NetBSD: sunxi_tcon.c,v 1.3 2018/04/03 16:17:59 bouyer Exp $");
#include <sys/param.h>
#include <sys/bus.h>
@@ -219,6 +219,10 @@
TCON_WRITE(sc, SUNXI_TCON0_IO_TRI_REG, 0xffffffff);
TCON_WRITE(sc, SUNXI_TCON1_CTL_REG, 0);
TCON_WRITE(sc, SUNXI_TCON1_IO_TRI_REG, 0xffffffff);
+ if (clk_disable(sc->sc_clk_ahb) != 0) {
+ aprint_error(": couldn't disable ahb clock\n");
+ return;
+ }
}
static void
@@ -304,6 +308,10 @@
if (!activate)
return EOPNOTSUPP;
+ if (clk_enable(sc->sc_clk_ahb) != 0) {
+ aprint_error_dev(dev, "couldn't enable ahb clock\n");
+ return EIO;
+ }
sc->sc_in_ep = ep;
sc->sc_in_rep = fdt_endpoint_remote(ep);
/* check that our other input is not active */
@@ -565,6 +573,11 @@
return error;
delay(20000);
if (enable) {
+ if ((error = clk_enable(sc->sc_clk_ch0)) != 0) {
+ device_printf(sc->sc_dev,
+ ": couldn't enable ch0 clock\n");
+ return error;
+ }
val = TCON_READ(sc, SUNXI_TCON_GCTL_REG);
val |= SUNXI_TCON_GCTL_EN;
TCON_WRITE(sc, SUNXI_TCON_GCTL_REG, val);
@@ -586,6 +599,11 @@
val = TCON_READ(sc, SUNXI_TCON_GCTL_REG);
val &= ~SUNXI_TCON_GCTL_EN;
TCON_WRITE(sc, SUNXI_TCON_GCTL_REG, val);
+ if ((error = clk_disable(sc->sc_clk_ch0)) != 0) {
+ device_printf(sc->sc_dev,
+ ": couldn't disable ch0 clock\n");
+ return error;
+ }
}
#ifdef SUNXI_TCON_DEBUG
sunxi_tcon_dump_regs(device_unit(sc->sc_dev));
@@ -597,6 +615,7 @@
sunxi_tcon1_enable(struct sunxi_tcon_softc *sc, bool enable)
{
uint32_t val;
+ int error;
KASSERT((sc->sc_output_type == OUTPUT_HDMI) ||
(sc->sc_output_type == OUTPUT_VGA));
@@ -604,6 +623,11 @@
fdt_endpoint_enable(sc->sc_in_ep, enable);
delay(20000);
if (enable) {
+ if ((error = clk_enable(sc->sc_clk_ch1)) != 0) {
+ device_printf(sc->sc_dev,
+ ": couldn't enable ch1 clock\n");
+ return error;
+ }
val = TCON_READ(sc, SUNXI_TCON_GCTL_REG);
val |= SUNXI_TCON_GCTL_EN;
TCON_WRITE(sc, SUNXI_TCON_GCTL_REG, val);
@@ -622,6 +646,11 @@
val = TCON_READ(sc, SUNXI_TCON_GCTL_REG);
val &= ~SUNXI_TCON_GCTL_EN;
TCON_WRITE(sc, SUNXI_TCON_GCTL_REG, val);
+ if ((error = clk_disable(sc->sc_clk_ch1)) != 0) {
+ device_printf(sc->sc_dev,
+ ": couldn't disable ch1 clock\n");
+ return error;
+ }
}
KASSERT(tcon_mux_inited);
Home |
Main Index |
Thread Index |
Old Index