cze
  mam problem: nie moge wyciagnac na netbsd transferow ponad 300kb/s.
nie wiem czym to moze byc spowodowane. karta sieciowa to VIA VT6102
(Rhine II) 10/100 Ethernet, switch do ktorego jestem podpiety obsluguje
100mbit/s full duplex. karta jest ustawiona na autonegocjacje. ip
przydzielany dynamicznie. czy to mozliwe, ze wtyczki kabla sa zle
zalozone ? (chyba wtedy to wogole nie powinna siec chodzic)

pozdrawiam i prosze o pomoc
Piotr Grabowski

oto konfiguracja:
# ifconfig vr0
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:0a:e6:48:ee:03
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet 153.19.211.175 netmask 0xfffff000 broadcast 153.19.223.255



NetBSD 1.6.1 (Grabarz NetBSD 1.6.1) #0: Tue Jan 20 00:30:17 UTC 2004
    root@grabarz:/usr/src/sys/arch/i386/compile/grabarz
cpu0: AMD Athlon Model 6 (Palomino) (686-class), 1662.05 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
total memory = 255 MB
avail memory = 233 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfb370
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3189 (rev. 0x00)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb168 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0171 (rev. 0xa3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
emuxki0 at pci0 dev 9 function 0: Creative Labs SBLive! EMU 10000 (audio
multime
dia, revision 0x06)
emuxki0: interrupting at irq 5
emuxki0: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emuxki0: full duplex, mmap, independent
Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x06)
at pci0
dev 9 function 1 not configured
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 10
bktr0: FlyVideo, Philips NTSC tuner.
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x02) at
pci0 dev 1
0 function 1 not configured
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x80)
at pci0
dev 16 function 0 not configured
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x80)
at pci0
dev 16 function 1 not configured
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x80)
at pci0
dev 16 function 2 not configured
VIA Technologies product 0x3104 (USB serial bus, interface 0x20,
revision 0x82)
at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00CRA1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 7, Ultra-DMA mode 5 (Ultra/100) (using
DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST CD-ROM GCR-8520B, , 1.00> type 5
cdrom remov
able
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:0a:e6:48:ee:03
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask e745 netmask ef45 ttymask ffc7
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)