Port-xen archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

xen3: no access to console



Hi,

I installed and booted xen3 on my Dell D420.
It seems to boot well expect I can't access the console.
I can access the system via ssh but the console seems frozen on (XEN)
message output:
<snip>
(XEN) Scrubbing Free RAM: ..........done.
(XEN) Xen trace buffers: disabled

When I type things on the keyboard, they appear on the screen,
owerwritting the (XEN) messages but it's like I was in vi in editing
mode - that is, nothing happens on my strikes (even Ctrl-C).

Find my dmesg attached, but I didn't found any usefull message.

Any clue ?
TIA,
        Jo

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_BETA2 (XEN3_DOM0) #0: Wed Jan 17 15:44:44 UTC 2007
        
builds%b1.netbsd.org@localhost:/home/builds/ab/netbsd-4/i386/200701170000Z-obj/home/builds/ab/netbsd-4/src/sys/arch/i386/compile/XEN3_DOM0
total memory = 192 MB
avail memory = 177 MB
BIOS32 rev. 0 found at 0xffa10
mainbus0 (root)
mainbus0: scanning 0x9f000 to 0x9f3f0 for MP signature
mainbus0: scanning 0x9ec00 to 0x9eff0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
cpu0 at mainbus0: apid 0 (boot processor)
cpu1 at mainbus0: apid 1 (application processor)
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: can't remap to apid 2
ioapic0: enabling
hypervisor0 at mainbus0
vcpu0 at hypervisor0: (uniprocessor)
vcpu0: Intel Pentium Pro, II or III (686-class), 1197.32 MHz, id 0x6e8
vcpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
vcpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
vcpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
xencons0: using event channel 2
npx0 at hypervisor0: using exception 16
acpi0 at hypervisor0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL  , M07    ,27d60c12>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
mpacpi: could not get bus number, assuming bus 0
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 2 at level 2
mpacpi: found subordinate bus 11 at level 2
mpacpi: found subordinate bus 12 at level 2
mpacpi: found subordinate bus 9 at level 2
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: 5 PCI busses
mpacpi: ISA interrupt override  0 -> 2
mpacpi: ISA interrupt override  9 -> 9
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 11 int routing
mpacpi: configuring PCI bus 12 int routing
mpacpi: configuring PCI bus 9 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act 
Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 31 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 31 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 30 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 30 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 30 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 30 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 29 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 29 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 29 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 29 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 27 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci2 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci2 device 1 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci2 device 1 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci2 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 8 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci11 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci11 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci11 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci11 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci12 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci12 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci12 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci12 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci9 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int9 189a0<vector=a0,delmode=1,logical,level,masked,dest=0> 
3000000<target=3>
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
pnp0c14 at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
ACPI Object Type 'Thermal' (0x0d) at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1hypervisor0: added to list as 
bus 0

pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device 
(rev. 0x03)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 0-3 added (80x25, vt100 emulation)
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, 
revision 0x03) at pci0 dev 2 function 1 not configured
Intel 82801GB/GR High Definition Audio Controller (multimedia subclass 0x03, 
revision 0x01) at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
pci1 at ppb0 bus 11ppb0: added to list as bus 11

pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01)
pci2 at ppb1 bus 12ppb1: added to list as bus 12

pci2: i/o space, memory space enabled
Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (miscellaneous network, 
revision 0x02) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x01)
pci3 at ppb2 bus 9ppb2: added to list as bus 9

pci3: i/o space, memory space enabled
bge0 at pci3 dev 0 function 0: Broadcom BCM5752 Gigabit Ethernet
ioapic0: int18 1a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0> 
3000000<target=3>
bge0: interrupting at ioapic0 pin 18, event channel 4
bge0: pcie mode=0x105000
bge0: ASIC BCM5752 A2 (0x6002), Ethernet address 00:15:c5:50:ac:49
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5752 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 
0x01)
ioapic0: int20 1a9b0<vector=b0,delmode=1,logical,actlo,level,masked,dest=0> 
3000000<target=3>
uhci0: interrupting at ioapic0 pin 20, event channel 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 
0x01)
ioapic0: int21 1a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0> 
3000000<target=3>
uhci1: interrupting at ioapic0 pin 21, event channel 6
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 
0x01)
ioapic0: int22 1a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0> 
3000000<target=3>
uhci2: interrupting at ioapic0 pin 22, event channel 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 
0x01)
ioapic0: int23 1a9c8<vector=c8,delmode=1,logical,actlo,level,masked,dest=0> 
3000000<target=3>
uhci3: interrupting at ioapic0 pin 23, event channel 8
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 
0x01)
ehci0: interrupting at ioapic0 pin 20, event channel 5
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe1)
pci4 at ppb3 bus 2ppb3: added to list as bus 2

pci4: i/o space, memory space enabled
Ricoh 5C476 PCI-CardBus bridge (CardBus bridge, revision 0xb4) at pci4 dev 1 
function 0 not configured
fwohci0 at pci4 dev 1 function 1: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 
0x09)
ioapic0: int17 1a9d0<vector=d0,delmode=1,logical,actlo,level,masked,dest=0> 
3000000<target=3>
fwohci0: interrupting at ioapic0 pin 17, event channel 9
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 39:4f:c0:00:2f:a5:bc:50
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Ricoh product 0x0822 (SD Host Controller system, interface 0x01, revision 0x18) 
at pci4 dev 1 function 2 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel using event channel 10 for irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 
31 function 3 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
WARNING: Callback scheduled before sysmon task queue thread present.
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
Xen clock: using event channel 13
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
xenbus0: using event channel 14
ehci0: handing over full speed device on port 2 to uhci0
uhub4: port 2, device disappeared after reset
uhub5 at uhub0 port 2
uhub5: Dell product 0xa005, class 9/0, rev 2.00/50.18, addr 2
uhub5: 4 ports with 0 removable, self powered
wd0 at atabus0 drive 0: <TOSHIBA MK6008GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
ugen0 at uhub5 port 2
ugen0: Novatel Wireless Novatel Wireless HSDPA Modem, rev 1.10/0.00, addr 3
uhub6 at uhub5 port 3
uhub6: O2 Micro product 0x7761, class 9/0, rev 1.10/1.10, addr 4
uhub6: 3 ports with 2 removable, bus powered
bge0: pcie mode=0x105000
bge0: pcie mode=0x105000
ugen1 at uhub6 port 2
ugen1: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 5
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Attachment: pgpsR9IFiVQk0.pgp
Description: PGP signature



Home | Main Index | Thread Index | Old Index