Ragge is correct, the KZQSA card is not a supported SCSI adapter under 
NetBSD. You need an MSCP emulating SCSI card (or an MSCP emulating DSSI 
card) to boot NetBSD.

--Chuck

At 10:49 AM 5/18/2003 +0200, ragge@ludd.luth.se wrote:
>The vector 0x4 interrupt is "machine check". And looking at the config
>it's obvious, you are trying to boot from some unsupported device,
>therefore referencing some memory address that does not exist.
>
>"boot dka0" would ask the boot program to load a kernel named "dka0"
>from the default boot device, which probably is unsupported if you
>loaded it from the SCSI adapter.
>
>-- Ragge