Anders Magnusson <ragge@ludd.luth.se> writes:
> > SIMH is an emulator which (among other things) can emulate a KA655
> > processor.  I'm currently installing NetBSD 1.5.2 on it, and it
> > works well so far.
> Cool! :-)

Booting from disk for the first time:

VAX simulator V2.9-0


KA655-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
>>>
>>> 
>>>boot dua0:
(BOOT/R5:0 DUA0)



  2..
-DUA0
  1..0..


>> NetBSD/vax boot [Aug 19 2001 05:57:49] <<
>> Press any key to abort autoboot 0
nfs_open: must mount first.
open netbsd.vax: Device not configured
> boot netbsd
1171836+57000+194876+[85608+100942]=0x18921a
[ preserving 186550 bytes of netbsd a.out symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.2 (GENERIC) #7: Sun Aug 19 12:43:34 PDT 2001
    matt@cougar.local:/u1/kobj/GENERIC

MicroVAX 3800/3900
cpu: KA655, CVAX microcode rev 6 Firmware rev 83
total memory = 16328 KB
avail memory = 12392 KB
using 229 buffers containing 916 KB of memory
mainbus0 (root)
ibus0 at mainbus0
uba0 at ibus0: Q22
dz0 at uba0 csr 160100 vec 314 ipl 15
uda0 at uba0 csr 172150 vec 774 ipl 15
mscpbus0 at uda0: version 3 model 3
mscpbus0: DMA burst size set to 4
ra0 at mscpbus0 drive 0: RA92
ra1 at mscpbus0 drive 1: RD54
ra2 at mscpbus0 drive 2: RD54
rx0 at mscpbus0 drive 3: RX50
rlc0 at uba0 csr 174400 vec 160 ipl 15
rl0 at rlc0 drive 0: RL01
rl1 at rlc0 drive 1: RL01
rl2 at rlc0 drive 2: RL01
rl3 at rlc0 drive 3: RL01
boot device: ra0
root on ra0a dumps on ra0b
ra0: size 2940951 sectors
TODR too small - CHECK AND RESET THE DATE.
root file system type: ffs
swapctl: adding /dev/ra0b as swap device at priority 0
Automatic boot in progress: starting file system checks.
/dev/rra0a: file system is clean; not checking
/dev/rra0d: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
logger: not found
/etc/rc: WARNING: $hostname not set.
add net 127.0.0.0: gateway 127.0.0.1
add net fe80::: gateway ::1
add net fec0::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::224.0.0.0: gateway ::1
add net ::127.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net ::255.0.0.0: gateway ::1
add net 2002:e000::: gateway ::1
add net 2002:7f00::: gateway ::1
add net 2002:0000::: gateway ::1
add net 2002:ff00::: gateway ::1
add net ::0.0.0.0: gateway ::1
IPv6 mode: host
Configuring network interfaces:.
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Creating runtime link editor directory cache.
Updating motd.
starting local daemons:.
Starting inetd.
Starting cron.
Mon Aug 20 01:17:22 CEST 2001

NetBSD/vax (Amnesiac) (console)

login: root
Password:
Aug 20 01:17:38  login: ROOT LOGIN (root) ON console
Aug 20 01:17:38  login: ROOT LOGIN (root) ON console
Copyright (c) 1996, 1997, 1998, 1999, 2000
        The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.

NetBSD 1.5.2 (GENERIC) #7: Sun Aug 19 12:43:34 PDT 2001

Welcome to NetBSD!

Terminal type? [unknown] xterm
Terminal type is xterm.                                                 
We recommend creating a non-root account and using su(1) for root access.
# 

-- 
Lars Brinkhoff          http://lars.nocrew.org/     Linux, GCC, PDP-10,
Brinkhoff Consulting    http://www.brinkhoff.se/    HTTP programming