WOOPEEE !!! :)
(ok it still has probs .. but looks REALLY promising)

Client output is below.

I assume I've done something wrong with my exported userland
(is that the correct phrase?)
any suggestions?
================================
>>>[BOOT/100 EZA0]
[snip]
Bootfile: [ENTER]
[snip]
NetBSD anounce (no autoboot occurs)
> boot
Trying BOOTP
Using IP address: 192.168.0.100
myip: (192.168.0.100)
root_addr=192.168.0.40 path=/export/marvin/root
1200336+44096+188936+[92880+109991] total=0x18f797
[ using 202876 bytes of netbsd a.out symbol table ]
Copyright .... [snip]
NetBSD 1.5R (GENERIC) #2: Sun Feb 11 20:25:36 CET 2001
    ragge...[snip]

VAX 4000/100
cpu0: KA52, ucode rev 2
total memory = 127 MB
avail memory = 114 MB
using 1663 buffers containing 6652 KB of memory
mainbus0 (root)
ibus0 at mainbus0
ze0 at ibus0
ze0: hardware address 08:00:2b:3e:8e:d3
device shac at ibus0 not configured
uba0 at ibus0: Q22
vsbus0 at mainbus0
dz0 at vsbus0 csr 0x25000000 vec 524 ipl 15 maskbit 3
dz0: 4 lines
lkkbd0 at dz0
lkms0 at dz0
wsmouse at lkms0
asc0 at vsbus0 csr 0x26000080 vec 510 ipl 15 maskbit 1
asc0: NCR53C94, 25MHz, SCSI ID 6
scsibus0 at asc0: 8 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 1 lun 0: <DEC, RRD42 (C) DEC, 4.5d> SCSI2 5/cdrom
remoe
boot device: ze0
root on ze0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP server: 192.168.0.40
nfs_boot: my_domain=dreamstealer
nfs_boot: my_addr=192.168.0.100
nfs_boot: my_mask=255.255.255.0
root on 192.168.0.40:/export/marvin/root
root file system type: nfs
init: not found
panic: no init
Stopped in pid 1 (init) at gcc2_compiled.: function "gcc2_compiled.()",
entry-mask 0x6361
        cvtbd (r11), $0
db>