I have this sort of trouble. The system comes to a login normally
without the network configuration (no domain name or gateway). If I were
to make the network active, this is what happens:




[ preserving 150120 bytes of netbsd a.out symbol table ]
 
Copyright (c) 1996, 1997, 1998, 1999
 
    The NetBSD Foundation, Inc.  All rights reserved.
 
Copyright (c) 1982, 1986, 1989, 1991, 1993
 
    The Regents of the University of California.  All rights reserved.
 
 
NetBSD 1.4L (NEWUBA) #527: Tue Oct 26 20:45:16 CEST 1999
 
    ragge@subzero:/u0/multi/src/sys/arch/vax/compile/NEWUBA
 
 
VAXstation 3100/m76
 
cpu: KA43
 
primary cache status: 21a<DPERR,HIT,REFRESH,ENABLE>
 
secondary cache status: ffe1<TPE,DPE,MISS,ENABLE>
 
total memory = 32508 KB
 
memory error!
 
primary cache status: 21a<DPERR,HIT,REFRESH,ENABLE>
 
secondary cache status: ffe1<TPE,DPE,MISS,ENABLE>
 
avail memory = 27492 KB
 
using 431 buffers containing 1724 KB of memory
 
mainbus0 (root)
 
vsbus0 at mainbus0
 
vsbus0: interrupt mask 8
 
le0 at vsbus0 csr 0x200e0000 vec 120 ipl 14 maskbit 5
 
le0: address 08:00:2b:25:2f:d8
 
le0: 32 receive buffers, 8 transmit buffers
 
dz0 at vsbus0 csr 0x200a0000 vec 304 ipl 14 maskbit 6
 
dz0: 4 lines
 
vax_confdata ff00ff3f cn_tab->cn_pri 3
 
lkc0 at dz0
 
ncr0 at vsbus0 csr 0x200c0080 vec 770 ipl 14 maskbit 1
 
scsibus0 at ncr0: 8 targets, 8 luns per target
 
ncr1 at vsbus0 csr 0x200c0180 vec 774 ipl 14 maskbit 0
 
scsibus1 at ncr1: 8 targets, 8 luns per target
 
smg0 at vsbus0 csr 0x200f0000 vec 104 ipl 14 maskbit 3
 
wsdisplay0 at smg0
 
wsdisplay0: screen 0-7 added (128x57, vt100 emulation)
 
scsibus0: waiting 2 seconds for devices to settle...
 
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ24     (C) DEC, 211B> SCSI1
0/direct fixed
 
sd0: 200 MB, 1348 cyl, 8 head, 38 sec, 512 bytes/sect x 409792 sectors
 
sd1 at scsibus0 targ 1 lun 0: <DEC, RZ24     (C) DEC, 211B> SCSI1
0/direct fixed
 
sd1: 200 MB, 1348 cyl, 8 head, 38 sec, 512 bytes/sect x 409792 sectors
 
sd2 at scsibus0 targ 5 lun 0: <DEC, RX23     (C) DEC, 0054> SCSI1
0/direct removable
 
sd2: drive offline
 
scsibus1: waiting 2 seconds for devices to settle...
 
booted from type 42 unit 0 controller 0 adapter 0
 
boot device: sd0
 
root on sd0a dumps on sd0b
 
mountroot: trying cd9660...
 
mountroot: trying nfs...
 
mountroot: trying lfs...
 
mountroot: trying ffs...
 
root file system type: ffs
 
init: copying out path `/sbin/init' 11
 
swapctl: adding /dev/sd0b as swap device at priority 0
Automatic boot in progress: starting file system checks.
/dev/rsd0a: 944 files, 15047 used, 16536 free (56 frags, 2060 blocks,
0.2% fragmentation)
/dev/rsd0a: MARKING FILE SYSTEM CLEAN
/dev/rsd0d: 1336 files, 50595 used, 51004 free (116 frags, 6361 blocks,
0.1% fragmentation)
/dev/rsd0d: MARKING FILE SYSTEM CLEAN
setting tty flags
starting network
hostname: vaxst.pasch.grp
domainname: pasch.grp
configuring network interfaces:.
panic: ptelen fault in system space: addr ffffa984 pc 800507b1
 
Stopped in route at     _arithflt+0x26e:        movl    $5, r0
 
Trap: type 0, code 0, pc 8000573e, psl 4170000
 
panic: trap
 
Stopped in route at     _arithflt+0x155:        pushab 
gcc2_compiled.+0x1114
 
Trap: type 0, code 0, pc 8000573e, psl 4170000
 
panic: trap
 
Stopped in route at     _arithflt+0x155:        pushab 
gcc2_compiled.+0x1114
 
Trap: type 0, code 0, pc 8000573e, psl 4170000
 
panic: trap
 
Stopped in route at     _arithflt+0x155:        pushab 
gcc2_compiled.+0x1114
 
Trap: type 0, code 0, pc 8000573e, psl 4170000
 
panic: trap
 
Stopped in route at     _arithflt+0x155:        pushab 
gcc2_compiled.+0x1114
 
Trap: type 0, code 0, pc 8000573e, psl 4170000
 
panic: trap
 
Stopped in route at     _arithflt+0x155:        pushab 
gcc2_compiled.+0x1114
 
Trap: type 0, code 0, pc 8000573e, psl 4170000
 
panic: trap
 
Stopped in route at
 85 RESTART SYS
 84 FAIL


HELP!

TiA

PA