Well, with -current of about yesterday, plus the posted (+2) fix attempt
for the SCSI issue, I can now read and (yay!)write to my SCSI drives.
However, I'm not real impressed with the speed. I'm seeing read speeds
of about 222K/sec. Shouldn't this be much higher? Is the vs4000/60
running in PIO mode?


--
 -Buckaroo

Relevand DMESG stuff: (Ignore the build date - I just haven't gotten the
clock set right yet).

NetBSD 1.4X (vs4060) #0: Sat Feb 21 23:15:50 PST 1970
     root@vs4060:/usr/src/sys/arch/vax/compile/vs4060

 VAXstation 4000/60
 cpu: KA46
 cpu: turning on floating point chip
 total memory = 56936 KB
 avail memory = 49656 KB
 using 737 buffers containing 2948 KB of memory
 mainbus0 (root)
 vsbus0 at mainbus0
 32K entry DMA SGMAP at PA 0x740000 (VA 0x80740000)
 interrupt mask 0
 le0 at vsbus0 csr 0x200e0000 vec 770 ipl 15 maskbit 1 buf 0x0-0xffff
 le0: address 08:00:2b:0e:c2:ea
 le0: 32 receive buffers, 8 transmit buffers
dz0 at vsbus0 csr 0x200a0000 vec 124 ipl 15 maskbit 4
dz0: 4 lines
lkc0 at dz0
asc0 at vsbus0 csr 0x200c0080 vec 774 ipl 15 maskbit 0
asc0: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
probe(asc0:0:0): max sync rate 6.25MB/s
sd0 at scsibus0 target 0 lun 0: <DEC, DSP3160S,T427> SCSI2 0/direct
fixed
sd0: 1526 MB, 2599 cyl, 16 head, 75 sec, 512 bytes/sect x 3125408
sectors
cd0 at scsibus0 target 2 lun 0: <DEC, RRD42   (C) DEC, 4.3d> SCSI2
5/cdrom removable
probe(asc0:4:0): max sync rate 6.25MB/s
sd1 at scsibus0 target 4 lun 0: <DEC, DSP3105S,386E> SCSI2 0/direct
fixed
sd1: 1001 MB, 2570 cyl, 14 head, 57 sec, 512 bytes/sect x 2050860
sectors