A week ago I've posted the following question (no answers yet):

>I'm just starting to try to boot VAX3100 from Linux.
>After a lot of reading I managed to boot from tape (miniroot.fs) but 
>then the VAX could not find the kernel (is the kernel also in the 
>miniroot.fs?).
>Also managed to create a bootable disk (dd-ing bootroot.fs) but same 
>problem.
>Got a little bit further by booting over the net (mop + bootp). Kernel 
>is loaded, root-fs has been mounted but the VAX stops after displaying 
>all the numbers (should come up with the Copyright message).
>Pushing the reset button gives rubbish on the console because the VAX 
>switched the baudrate on the console port from 9600 to 4800...
>
>What am I missing or doing wrong?

Here's some additional information:

>>> show ver
KA41-D V1.1C7-17B-V6.4-263
          PST: 17B
          CON: 1C7
          VMB: V6.4
          ROM: 263
>>> show mem
          00C00000
          00000000
          00BE4600:00BFFFFF
>>> boot

-ESA0
>> NetBSD/vax boot [Aug 13 1999 20:18:28] <<
>> Press any key to abort autoboot 3
Press '?' for help
> boot netbsd
Trying BOOTP
Using IP address: 10.1.1.12
myip:  (10.1.1.12), mask: 255.255.255.0
root addr=10.1.1.10 path=/common/netroots/nettie
841724+43856+159808 +[64440+72748] total=0x120b78

and then nothing happens...
Any ideas?