Subject: Vaxstation 4000-model 60
To: None <port-vax@netbsd.org>
From: Tom Everett <teverett@home.com>
List: port-vax
Date: 06/23/1999 04:04:24
--------------728DEEDC5E4F3EDD077E023B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


    Hi everyone.  I've been interested in running NetBSD on a vax for a
couple months now, and today I became the proud owner of a Vaxstation
4000 model 60.  I have a couple questions I'm hoping someone out there
can answer.  Firstly, some information about the vax.  It has an
internal 400 MB SCSI HD and an External 1GB SCSI HD.  It also has an
external SCSI CDROM which is not connected.  When I start it I get the
machine's MAC address as well as:

    KA46-A V1.1- 31E - V4.0.

    Typeing "SHOW DEV" shows:

    ESA0 (MAC ADDRESS)
    DKA200 A/2/0   DISK 1.06GB FX - CFP1060
    DKA300 A/3/0   DISK  426.25MB FX - RZ25

    My question is:  Because the SCSI controller in VS4000M60 is not
supported, is it impossible to install netbsd on this machine?

    Thanks for your help.

--

Tom and Jeanette Everett
http://www.khubla.com
...Never underestimate the bandwidth of a van full of tapes...



--------------728DEEDC5E4F3EDD077E023B
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
&nbsp;
<br>&nbsp;&nbsp;&nbsp; Hi everyone.&nbsp; I've been interested in running
NetBSD on a vax for a couple months now, and today I became the proud owner
of a Vaxstation 4000 model 60.&nbsp; I have a couple questions I'm hoping
someone out there can answer.&nbsp; Firstly, some information about the
vax.&nbsp; It has an internal 400 MB&nbsp;SCSI&nbsp;HD and an External
1GB SCSI&nbsp;HD.&nbsp; It also has an external SCSI CDROM&nbsp;which is
not connected.&nbsp; When I start it I&nbsp;get the machine's MAC address
as well as:
<p>&nbsp;&nbsp;&nbsp; KA46-A V1.1- 31E - V4.0.
<p>&nbsp;&nbsp;&nbsp; Typeing "SHOW DEV" shows:
<p>&nbsp;&nbsp;&nbsp; ESA0 (MAC ADDRESS)
<br>&nbsp;&nbsp;&nbsp; DKA200 A/2/0&nbsp;&nbsp; DISK&nbsp;1.06GB FX - CFP1060
<br>&nbsp;&nbsp;&nbsp; DKA300 A/3/0&nbsp;&nbsp; DISK&nbsp; 426.25MB FX
- RZ25
<p>&nbsp;&nbsp;&nbsp; My question is:&nbsp; Because the SCSI&nbsp;controller
in VS4000M60 is not supported, is it impossible to install netbsd on this
machine?
<p>&nbsp;&nbsp;&nbsp; Thanks for your help.
<pre>--&nbsp;

Tom and Jeanette Everett
">http://www.khubla.com
...Never underestimate the bandwidth of a van full of tapes...</pre>
&nbsp;</html>

--------------728DEEDC5E4F3EDD077E023B--