The latest 1.4Alpha doesn't seem to boot revarp correctly. I'm trying to
netboot from a FreeBSD server. The boot program I'm using is Michaels that
was compiled to try RevARP first (rather than DHCP because of my DHCP
service issue)

Anyway, I've configured the vax on a switch with a virtual lan and only the
vax and its server live there, boot gets through to MOP and rarp to get the
kernel to boot but when the kernel trys to mountroot it trys DHCP first
(fails) and then trys Rarp and that fails too.

What follows is the boot info...

>>> b xqa0

  2..1..0..


>> NetBSD/vax boot [Dec  7 1998 21:06:45] <<
>> Press any key to abort autoboot 3
> boot
Trying BOOTPARAMS
boot: client IP address: 172.16.3.4
boot: client name: chuckvax
root addr=172.16.3.1 path=/export/chuckvax/netboot/root.1.4A
834012+43872+161312+[64440+72729] total=0x11f335
Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4_ALPHA (GENERIC) #0: Mon Apr  5 17:44:15 CEST 1999
    ragge@vs4000:/usr/src/sys/arch/vax/compile/GENERIC

MicroVAX II
realmem = 9428992
avail mem = 6578176
Using 115 buffers containing 471040 bytes of memory.
mainbus0 (root)
cpu0 at mainbus0: KA630
uba0 at mainbus0: Q22
mtc0 at uba0 csr 174500 vec 774 ipl 17
mscpbus0 at mtc0: version 7 model 3
mscpbus0: DMA burst size set to 4
mt0 at mscpbus0 drive 0: TK50
uda0 at uba0 csr 172150 vec 770 ipl 17
mscpbus1 at uda0: version 0 model 13
mscpbus1: DMA burst size set to 4
ra0 at mscpbus1 drive 0: RA81
ra1 at mscpbus1 drive 1: RA81
qe0 at uba0 csr 174440 vec 764 ipl 17
qe0: delqa, hardware address 08:00:2b:19:9d:c1
boot device: qe0
nfs_boot: trying DHCP/BOOTP
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: trying RARP (and RPC/bootparam)
revarp failed, error=51
no file system for qe0
cannot mount root, error = 79
root device (default qe0):