>If you can provide info on your enclosure type (BA23 or BA123) and
>current slot locations of you Q-bus boards, we should be able to advise
>you on whether anything is amiss there.  It could still be a jumper =
thing
>I suppose.  I'll dig up the docs on the DELQA.


It's a BA123 and a picture of the slot locations can be viewed at:

http://www.acc.umu.se/~mnementh/computers/pictures/uvax07.jpg

or here's an crude ascii chart:

      A          B      C         D
   +----------------+----------------+
1  | KA630 CPU (quad)                |
   +----------------+----------------+
2  | 8 Mb RAM (quad)                 |
   +----------------+----------------+
3  | 4 Mb RAM (quad)                 |
   +----------------+----------------+
4  | TQK50 (dual)   | DELQA (dual)   |
   +----------------+----------------+
5  | RQDX3 (dual)                    |
   +----------------+----------------+
6  |                                 |
   +----------------+----------------+

And I think I've discovered the problem: the CD on slot 4 have no =
conection according to figure 1-9 in the uVAX II Technical Manual. So, I =
should move it to 5 CD, right?=20

The dip-switch settings could be useful anyway though.

Regards / Tomas