Subject: Problem booting Vaxstation
To: None <port-vax@NetBSD.ORG>
From: Dudley M. Bertram <bertram@kodak.com>
List: port-vax
Date: 04/06/1998 10:35:14
I aquired a vaxstation 3100m38 recently and am trying to netboot it.
I get all the required files from the gatekeeper mirror of
ftp.netbsd.org.
( For anyone interested I am using a vaxstation 4000 model 60 running
VMS
with TGV multinet 4.0 as the mop/boot server. Multinet provides all
the
tools necessary for a vms machine to be a boot server. Send me email
for details or if there is sufficient interest, I will post )
Anyway, the 3100 has the scsi/scsi controller combo as far as I can tell
but below is the result of the boot attempt. It just hangs afterwards...
help...............
*****************************************************************************
-ESA0
>> NetBSD/vax boot [980110 22:29] <<
: /netbsd
boot: client IP address: 150.103.44.17
boot: client name: dudsun2
root addr=150.103.44.15 path=/dka100/dudsun2/root
700416+38912+75784 start 0x9c078
Copyright (c) 1996, 1997 The NetBSD Foundation, Inc. All rights
reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.3 (GENERIC) #1: Fri Jan 16 16:09:22 CET 1998
ragge@multivac:/usr/hej/src/sys/arch/vax/compile/GENERIC
realmem = 16646144
avail mem = 12690432
Using 812 buffers containing 831488 bytes of memory.
backplane0 (root)
cpu0 at backplane0: MicroVAX 3100 (KA41)
vsbus0 at backplane0
le0 at vsbus0: address 08:00:2b:14:9c:d7
le0: 32 receive buffers, 8 transmit buffers
probing for SCSI controller at 0x200c0080...
result: 0x0 (0)
SCSI controller found.
probing for SCSI controller at 0x200c0080...
result: 0x0 (0)
SCSI controller found.
ncr0 at vsbus0: scsi-id 7
scsibus0 at ncr0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <DEC, RZ23 (C) DEC, 0A18> SCSI1
0/direct fixed
sd0: 100MB, 776 cyl, 8 head, 33 sec, 512 bytes/sect x 204864 sectors
sd1 at scsibus0 targ 5 lun 0: <DEC, RX23 (C) DEC, 0054> SCSI1
0/direct remov
able
sd1: drive offline
probing for SCSI controller at 0x200c0180...
result: 0x0 (0)
SCSI controller found.
ncr1 at vsbus0: scsi-id 7
scsibus1 at ncr1: 8 targets
ncr1: no REQ for next phase, abort