Bertram,

I'm running 1.2 release on a uVAXII with 9MB of RAM.

vaxine:~# pstat -s
Device      1K-blocks     Used    Avail Capacity  Type
/dev/ra4b       36864     1057    35807     3%    Interleaved

vaxine:~# vmstat
vmstat: No drives attached.
 procs   memory     page                      faults   cpu
 r b w   avm   fre  flt  re  pi  po  fr  sr   in   sy  cs us sy id
 0 0 0  7646   784   26   6   0   0   0   0    0    0   3  1 98  0

What the...?

Output from the top command:

load averages:   0.96,  0.44,  0.31             11:41:50
26 processes:  1 running, 25 sleeping
Cpu states:  4.3% user,  0.0% nice, 95.7% system,  0.0% interrupt,  0.0%
idle
Memory: 2790K Act 2578K Inact 1246K Wired 644K Free 3% Swap

To the person asking about people successfully running 1.2 on any VAX
hardware:

I got NetBSD/vax 1.2 release from our own NetBSD mirror (ftp.bitcon.no)
but this shouldn't matter as it is simply the 1.2 release that should be
available on every NetBSD mirror as well as of course on ftp.netbsd.org.
It has only crashed once since I installed it on December 6, 1996.

vaxine:~# uptime
11:46AM  up 76 days, 14:49, 1 user, load averages: 0.21, 0.32, 0.29

Gunnar

--
Gunnar Helliesen   | Bergen IT Consult AS  | NetBSD/VAX on a uVAX II
Systems Consultant | Bergen, Norway        | '86 Jaguar Sovereign 4.2
gunnar@bitcon.no   | http://www.bitcon.no/ | '73 Mercedes 280 (240D)


>-----Original Message-----
>From:	Bertram Barth [SMTP:bertram@ifib.uni-karlsruhe.de]
>Sent:	Thursday, June 05, 1997 11:26 AM
>To:	port-vax@NetBSD.ORG
>Subject:	NetBSD/vax not swapping?!?
>
>Is there anybody out there who's 1.2D (or 1.2x)
>machine is swapping?