Subject: Re: More VS2000 booting problems
To: Karl Maftoum <k.maftoum@student.canberra.edu.au>
From: Dan Gardner <wiggy@praxis.co.uk>
List: port-vax
Date: 05/30/1997 11:03:49
OK, I have done everything in Brian's FAQ
o both machines are on the same IP segment
o ifconfig eth0 gives UP BROADCAST RUNNING MULTICAST ALLMULTI
o ethers, hosts, bootparams, rarp table etc. all have correct info
o /tftpboot/mop has both 08002b0c9af6.SYS and MOPBOOT.SYS
o mopd -a -d shows this repeatedly, then stops:
MOP DL 8:0:2b:c:9a:f6 > ab:0:0:1:0:0 len 18 code 08 RPR
MOP DL 0:0:c0:b2:72:64 > 8:0:2b:c:9a:f6 len 1 code 03 ASV
o moptrace -a show this repeatedly, then stops:
Dst : ab:0:0:1:0:0 MOP Dump/Load Multicast
Src : 8:0:2b:c:9a:f6
Proto : 6001 MOP Dump/Load
Length : 0012 (18)
Code : 08 Request program
Device Type : 05 QNA 'DEQNA'
Format : 01
Program Type : 02 Operating System
Software : 07 'MOPBOOT'
Processor : 00 System Processor
DL Buff Size : 0406 (1030)
o /var/log/messages says that the "Do you have MOPBOOT (Yes)" is
repeated 47 times
However, when I power up the VS2000, I see the following:
KA410-B V2.2
F...E...D...C...B...A...9...8...7...6...5...4_..3_..2_..1...
? 6 00A0 0000.4001
>>>
And when I try to boot it, I get:
?06 HLT INST
PC = 00000E64
>>>
after the %VMB- stuff in my previous mail.
Any ideas? Are there any TEST commands I need to set? (T51=ESA0,
T52=100, T53=3)
Regards,
--
:-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==:
: Dan Gardner PC Support Technician :
: Praxis Computing Facilities :
: mailto:wiggy@praxis.co.uk Praxis plc :
: Tel. (01225) 739253 (direct) 20 Manvers Street :
: Tel. (01225) 444700 (switchboard) Bath BA1 1PX :
: :
: If a man hasn't discovered something that he will die for, he isn't :
: fit to live - Martin Luther King, June 23 1963 :
:-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==:
Karl Maftoum wrote:
>
> On Wed, 28 May 1997, Dan Gardner wrote:
>
> > OK, I have got down all the stuff needed to boot my VS2000, built a
> > linux box with mopd etc.
> >
> > Now when I try to boot the VS2000 off esa0, I get the Bootfile:
> prompt
> > and on the linux box (from an strace'd mopd and a moptrace) I can
> see
> > the VS2000 sending loads of requests for a mop package, but nothing
> ever
> > gets back to the Vax. On the Vax, I get:
> >
>
> Ok, if you run mopd -d -a do you see any request packets?
>
> Secondly the mopboot file on the Linux box should be named
> MOPBOOT.SYS in /tftpboot/mop/ (the capitalisation is important)
>
> Do you have multicasting on in the kernel?
>
> Also did you try ifconfig eth0 allmulti ?
>
> Let me know please!!
>
> Cheers
> Karl
>
>
>
> ------------------------------------------------------------------------------
>
> Karl Maftoum
> Computer Engineering Student at the University of Canberra, Australia
>
> Email: k.maftoum@student.canberra.edu.au