Re: NetBSD installation on Sun Ultra 10

[Michael <macallan%netbsd.org@localhost>]

Hello,

On Sat, 25 Jul 2020 23:14:25 +0200
Connor McLaughlan <cont6pro3%gmail.com@localhost> wrote:

> i can't boot the install cd on my Ultra 10. It seems to have problems
> with the IDE controller or the CRD-8322B drive:
> 
> [] wd0 ata atabus0 drive 0
> [] wd0: <WDC WD800JB-00FSA0>
> [] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sector
> s
> [] atapibus0 at atabus1: 2 targets
> [] cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
> [] WARNING: 2 errors while detecting hardware; check system log.
> [] wdc_atapi_intr: bad data phase DATAOUT
> [] cmdide0:1:0: reset failed
> [] cmdide0:1:0: unbusy timed out
> [] cmdide0:1:0: reset failed
> [] cmdide0:1:0: unbusy timed out
> ...
> (conitinues and the install system never comes up)
> 
> This error can be found on mailing lists dating back to NetBSD 5 / 2009.
> 
> But there are people running NetBSD on the Ultra 10.
> So what is the solution? Do i have to use a different kernel or a
> different cdrom?

That smells like a hardware problem, IDE cables get old and cause
failures in weird places. An U10 is certainly old enough to do this.
What I'd try, not necessarily in this order:
- reseat all the IDE connections, check the connectors for damage,
  rust, dirt etc.
- replace the IDE cable
- try to boot something else, like Solaris, to see if the problem is
  NetBSD-specific.

have fun
Michael