Port-sparc64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

smartctl and munin

	Hello,
I'm trying to install munin-node on a blade2000 running NetBSD-current. Munin-node runs fine and all data are sent to a centralized munin-server running linux.
I have seen that smart_ scripts do not work as expected on NetBSD (sparc64 ?) as both smartctl output (NetBSD one and linux one) are different. 

On Linux host, smartctl returns :
Root rayleigh:[~] > smartctl -a /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA100
Serial Number:    93U1NHKKS
LU WWN Device Id: 5 000039 ff7c0c155
Firmware Version: MS2OA750
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Jan  6 09:44:41 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever 
                                        been run.
Total time to complete Offline
data collection:                ( 7361) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support. 
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 123) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
SCT Error Recovery Control supported. 
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 76 3 Spin_Up_Time 0x0007 126 126 024 Pre-fail Always - 177 (Average 187) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 110 110 020 Pre-fail Offline - 36 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5842 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 

and a lot of values used by munin script.


On NetBSD side, smartctl returns :
hilbert# smartctl -a /dev/rsd0c
smartctl 6.2 2013-07-26 r3841 [sparc64--netbsd] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST3146807FC
Revision:             0006
User Capacity:        146 815 737 856 bytes [146 GB]
Logical block size:   512 bytes
Rotation Rate:        10033 rpm
Device type:          disk
Transport protocol:   Fibre channel (FCP-2)
Local Time is:        Tue Jan  6 09:50:53 2015 CET
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     31 C
Drive Trip Temperature:        68 C

Elements in grown defect list: 1

Vendor (Seagate) cache information
  Blocks sent to initiator = 3106231726
  Blocks received from initiator = 1892902205
  Blocks read from cache and sent to initiator = 3292530887
  Number of read and write commands whose size <= segment size = 226801512
  Number of read and write commands whose size > segment size = 144709630

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 39927,58
  number of minutes until next internal SMART test = 94

Error counter log:
Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 4837521 0 0 4837521 4837522 71740,062 0 write: 0 0 0 0 0 29502,941 0 

Non-medium error count:   158292


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] 
     Description                              number   (hours)
# 1 Background short Completed - 2 - [- - -] # 2 Background short Completed - 2 - [- - -] 
Long (extended) Self Test duration: 3072 seconds [51,2 minutes]
I don't undestand why smartctl does report data with the same format. I have tried to rebuild smartctl from pkgsrc with the same result. Any idea ? 

	Best regards,

	JKB
Home | Main Index | Thread Index | Old Index