Re: FFB EDID testers wanted

[Julian Coleman <jdc%coris.org.uk@localhost>]

Hi,

> Do you have part numbers of cards you would like to have your
> patch tested with?

I think the complete list of cards is:

           501-2634      Creator Series 1 (FFB)
                         Ultra1, Ultra2
           501-4127      Creator Series 1 (FFB)
                         Ultra1, Ultra2, Enterprisexx00
           501-2633      Creator 3D Series 1 (FFB)
                         Ultra1, Ultra2
           501-3129      Creator 3D Series 1 (FFB)
                         Ultra1, Ultra2, Enterprisexx00
           501-4126      Creator 3D Series 1 (FFB)
                         Ultra1, Ultra2
           501-4174      Creator Series 2 (FFB2)
                         Ultra 30, Ultra 60
           501-4173      Creator3D Series 2 (FFB2)
                         Ultra1, Ultra2, Enterprisexx00
           501-4172      Creator3D Series 2 (FFB2)
                         Ultra30, Ultra60
           501-4789      Creator Series 3 (FFB2+)
                         Ultra10, Ultra30, Ultra60
           501-4790      Creator 3D Series 3 (FFB2+)
                         Ultra2, Enterprisexx00
           501-4788, 501-5690
                         Creator 3D Series 3 (FFB2+)
                         Ultra10, Ultra30, Ultra60, Blade1000, Blade2000
           501-4860, 501-5268, 501-5201, 501-5484
                         Elite3D-m3 Series 1 (AFB)
                         Ultra10, Ultra30, Ultra60, Ultra80
           540-3623, 540-3902
                         Elite3D-m6 Series 1 (AFB)
                         Ultra10, Ultra30, Ultra60, Ultra80
           501-5574, 501-5575
                         Elite3D-m3 Series 2 (AFB)
                         Ultra10, Ultra30, Ultra60, Ultra80, Blade1000,
                         Blade2000
           540-4313      Elite3D-m6 Series 2 (AFB)
                         Ultra10, Ultra30, Ultra60, Ultra80, Blade1000,
                         Blade2000
           540-3058, 540-3979, 540-4335
                         Elite3D-m6 (AFB)
                         Ultra2, Ultra450, Enterprisexx00

I've tested with 501-4788/501-5690, 501-4790 (Creator 3D Series 3), and
540-3623 (Elite3D Series 1) cards.  So, reports from any of the Creator
cards and any Series 1 or 2 cards would be very welcome.

If the EDID data could be read, and the driver finds a video mode, lines
like:

  ffb0: video mode set to: 1920 x 1200 @ 60Hz
  ffb1: video mode set to: 1280 x 1024 @ 60Hz

will be printed when the vide mode is set.

Thanks,

J

-- 
  My other computer also runs NetBSD    /        Sailing at Newbiggin
        http://www.netbsd.org/        /   http://www.newbigginsailingclub.org/