Port-sparc64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: wm(4) misreporting PCI bus properties
On Wed, Dec 15, 2010 at 05:14:41PM +0000, Eduardo Horvath wrote:
> > my ULTRA60 (running NetBSD/sparc64 5.99.41) reports its Intel Gigabit
> > ethernet card like this:
> >
> > wm0 at pci1 dev 1 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2
> > wm0: interrupting at ivec 0
> > wm0: 32-bit 66MHz PCI bus
> > wm0: 64 word (6 address bits) MicroWire EEPROM
> > wm0: Ethernet address 00:07:e9:**:**:**
> > makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
> >
> > What puzzles me is why it claims that it is using a "32-bit PCI bus".
> > The 66MHz PCI slot in the ULTRA60 definitely supports 64-bit. Is that
> > a problem with wm(4), with the PCI support for the ULTRA60's chipset
> > or something else?
>
> Most likely the wm0 card is not 64-bit PCI and does not support 64-bit
> address cycles.
*aargh*
You are right.
It turns out I that forgot to install the discarded 64-bit PCI card I got
from work a while ago. Sorry for the noise. :-(
Kind regards
--
Matthias Scheler http://zhadum.org.uk/
Home |
Main Index |
Thread Index |
Old Index