Netra X1 with WD0 and AcerIDE

["Maurizio Caloro" <mauric%gmx.ch@localhost>]

Hello together

After discussed with Matthias i install the release NetBSD 5.1-RC4 Sparc64 with 
Netbsd on Netra X1. but if this booting i see that any trubles exist with WD0 
and properly it's this from "Aceride" and wrong Synchronisation DMA Modus.

Machine Type:
Netra X1, 500Mhz, 1024 Memory, Barracuda Ide 220Gb Disk.

I'am happy for any help and feedback
best regards
Mauri

NetraX1# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_RC4 (GENERIC) #0: Tue Sep 14 02:04:42 UTC 2010
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RC4/sparc64/201009140238Z-obj/home/builds/ab/netbsd-5-1-RC4/src/sys/arch/sparc64/compile/GENERIC
total memory = 1024 MB
avail memory = 991 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,UltraAX-i2 (Sun Netra X1): hostid 82039c1a
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, UPA id 0
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 80000000
IOTSB: 411b2000 to 41232000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819
power at ebus0 addr 2000-2007 ipl 35 not configured
lom0 at ebus0 addr 8010-8011 ipl 42: SUNW,lomh: LOMlite2 rev 3.10
lom0: 1 fan(s), 1 PSU(s), 1 temp sensor(s)
lom0: Watchdog timer configured.
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, working fifo
flashprom at ebus0 addr 0-7ffff not configured
alipm0 at pci0 dev 3 function 0: 74KHz clock
iic0 at alipm0: I2C bus
spdmem0 at iic0 addr 0x56
spdmem0: SDRAM memory, data ECC, 512MB, 133MHz (PC-1100)
spdmem0: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x57
spdmem1: SDRAM memory, data ECC, 512MB, 133MHz (PC-1100)
spdmem1: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
admtemp0 at iic0 addr 0x18: ADM1021 or compatible environmental sensor
tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:03:ba:0f:9b:1d
dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev. 0
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp1: interrupting at ivec 301c
tlp1: Ethernet address 00:03:ba:0f:9b:1d
dmphy1 at tlp1 phy 1: DM9102 10/100 media interface, rev. 0
dmphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 
0x03)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 500000000 Hz quality 100
No counter-timer -- using %tick at 500MHz as system clock.
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <ST3250823A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs
aceride0:0:0: lost interrupt
        type: ata tc_bcount: 8192 tc_skip: 0
aceride0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
wd0d: DMA error reading fsbn 128 of 128-143 (wd0 bn 315393248; cn 312890 tn 2 
sn 2), retrying
aceride0:0:0: lost interrupt
        type: ata tc_bcount: 8192 tc_skip: 0
aceride0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0d: DMA error reading fsbn 128 of 128-143 (wd0 bn 315393248; cn 312890 tn 2 
sn 2), retrying
aceride0:0:0: lost interrupt
        type: ata tc_bcount: 8192 tc_skip: 0
aceride0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA)
wd0d: DMA error reading fsbn 128 of 128-143 (wd0 bn 315393248; cn 312890 tn 2 
sn 2), retrying
aceride0:0:0: lost interrupt
        type: ata tc_bcount: 8192 tc_skip: 0
aceride0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to PIO mode 4
wd0(aceride0:0:0): using PIO mode 4
wd0d: DMA error reading fsbn 128 of 128-143 (wd0 bn 315393248; cn 312890 tn 2 
sn 2), retrying
wd0: soft error (corrected)
NetraX1#

-- 
GMX.ch - Schweizer FreeMail-Dienst mit Ãber 800.000 Mitgliedern
E-Mail & mehr! Kostenlos: http://portal.gmx.net/de/go/chfreemail