Port-sparc64 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

free Ultra60 for pick-up in Silicon Valley CA, USA



I have an Ultra60 to give away to a good home.  It is located in
Silicon Valley CA, USA and due to the size/weight I don't believe
I'll be able to ship it, so local pick-ups only, please.

Basic specs are:

  Ultra60, 2*450MHz CPU, 2GB RAM, 2*72GB SCSI disks, DVD,
  2*hme, QLogic SCSI card, SysKonnect GigE

I also have a spare set of slower (360MHz) CPUs leftover from before
the upgrade; they haven't been used in a while but they were good
when I pulled them, and I'll send them along too.

Full dmesg is included below.

Cheers,
sr.
--
console is /pci@1f,4000/ebus@1/se@14,400000:a
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0.1 (GENERIC) #0: Wed Oct  8 01:13:20 PDT 2008
        
builds@wb32:/home/builds/ab/netbsd-4-0-1-RELEASE/sparc64/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/sparc64/compile/GENERIC
total memory = 2048 MB
avail memory = 1996 MB
timecounter: Timecounters tick every 10.000 msec
bootpath: /pci@1f,4000/scsi@3/disk@0,0:a
mainbus0 (root): SUNW,Ultra-60: hostid 80be7627
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 450.036 MHz, UPA id 0
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
cpu at mainbus0 not configured
psycho0 at mainbus0 addr 0xfffb4000
SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: fe000000 to ffffe000
IOTSB: 2196000 to 219e000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sc at ebus0 addr 500000-500007 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
wsmouse0 at ms0 mux 0
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not 
configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 
722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
hme0 at pci0 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:be:76:27
ukphy0 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
esiop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 1820
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci0 dev 3 function 1: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ivec 1826
scsibus1 at esiop1: 16 targets, 8 luns per target
hme1 at pci0 dev 2 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ivec 3011
hme1: Ethernet address 08:00:20:be:76:27
ukphy1 at hme1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0 at pci0 dev 4 function 0: ivec 18
skc0: interrupt moderation is 0 us
skc0: SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter rev. (0x1)
sk0 at skc0 port A: Ethernet address 00:00:5a:9b:13:1e
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
isp0 at pci0 dev 5 function 0: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at ivec 1c
scsibus2 at isp0: 16 targets, 8 luns per target
psycho1 at mainbus0 addr 0xfffc6000
SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128
pci1 at psycho1
pci1: i/o space, memory space enabled
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci1 dev 1 
function 0 not configured
hme2 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme2: interrupting at ivec 3001
hme2: Ethernet address 08:00:20:be:76:27
ukphy2 at hme2 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0006b8, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec and 7ed
ffb0 at mainbus0 addr 0xfeb80000: Creator3D, model SUNW,501-4788, dac 10
ffb0: attached to /dev/fb0
wsdisplay1 at ffb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (sunffb, sun emulation)
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 450036421 Hz quality 100
wskbd0 at kbd0 mux 1
kbd0: reset failed
wskbd0: connecting to wsdisplay1
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <NETAPP, X243_FAL7E073S10, NA00> disk fixed
sd0: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors
sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <NETAPP, X243_FAL7E073S10, NA00> disk fixed
sd1: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors
sd1: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1007> cdrom 
removable
cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers
root on sd0a dumps on sd0b
root file system type: ffs


Home | Main Index | Thread Index | Old Index