Re: Files of death on sparc64

[James Birdsall <jwb-tech%picarefy.com@localhost>]

Julian Ganz wrote:
> Martin Husemann (Sonntag, 10. August 2008 12:11):
>   
> > On Sun, Aug 10, 2008 at 12:40:02AM -0700, James Birdsall wrote:
> >     
> > > I have an AXi with a couple of SATA controllers on the PCI bus and four
> > > SATA disks.
> > >       
> > Can you please show the dmesg part for that controllers and disks?
> >
> > Thanks,
> >
> > Martin
> >     
> a list of filesystems used on the server also could help finding the source of 
> the panics.
>
> btw: please don't double-post. one message to the list is enough to reach 
> everybody on the list including the author of the previous mail. actually 
> that's why mailing-lists exist.
>   
The filesystems are all standard FFS created with newfs with no options.

The requested parts of the dmesg. sd0 is the OS disk, the others are 
exported via samba.

esiop0 at pci2 dev 1 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 1820
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci2 dev 1 function 1: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ivec 1820
scsibus1 at esiop1: 16 targets, 8 luns per target
satalink0 at pci2 dev 2 function 0
satalink0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using ivec 0 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
satalink1 at pci2 dev 4 function 0
satalink1: Silicon Image SATALink 3512 (rev. 0x01)
satalink1: SATALink BA5 register space disabled
satalink1: bus-master DMA support present
satalink1: primary channel wired to native-PCI mode
satalink1: using ivec 10 for native-PCI interrupt
atabus2 at satalink1 channel 0
satalink1: secondary channel wired to native-PCI mode
atabus3 at satalink1 channel 1
[...]
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0satalink0: port 1: device present, speed: 1.5Gb/s
: <ST3750640AS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 698 GB, 1453521 cyl, 16 head, 63 sec, 512 bytes/sect x 1465149168 
sectors
satalink1: port 0: device present, speed: 1.5Gb/s
satalink1: port 1: device present, speed: 1.5Gb/s
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd1 at atabus1 drive 0: <MAXTOR STM3160815AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd2 at atabus2 drive 0: <ST3750640AS>
wd2: quirks 2<FORCE_LBA48>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 698 GB, 1453521 cyl, 16 head, 63 sec, 512 bytes/sect x 1465149168 
sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd3 at atabus3 drive 0: <Maxtor 6L300R0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(satalink1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
sd0 at scsibus0 target 0 lun 0: <DEC, RZ28M    (C) DEC, 0568> disk fixed
sd0: 2007 MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sd0: sync (100.00ns offset 15), 16-bit (20.000MB/s) transfers, tagged 
queueing
root on sd0a dumps on sd0b
root file system type: ffs