Port-sparc64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: [Fwd: Re: mt status && LTO1]
With this drive it is ok:
st0 at scsibus1 target 5 lun 0: <SONY, SDT-9000, 0601> tape removable
st0: density code 37, 512-byte blocks, write-enabled
st0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
What could be the reason for this?
Well, either the other drive is buggy, or our code fails with some drive
that does meet specs. I would suggest figuring out what kind of scsi
debugging you can turn on and looking at the commands going back and
forth.
Home |
Main Index |
Thread Index |
Old Index