-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Feb 11, 2008, at 03:25, Al - image hosting services wrote:

> On Sun, 10 Feb 2008, Michael Lorenz wrote:
>>> I have been doing some research, though I still don't have any
>>> answers.
>>>
>>> Looking at the Sun Blade 100, it is a small pci based machine. This
>>> would
>>> be great for my purpose. I should be able put in 2 hard drives,
>>> plus if I
>>> pulled the cdrom, floppy drive and card reader I should be able to
>>> put in
>>> 2 more. Does anyone know if the power supply could run this many
>>> drives or
>>> if there is are upgrade options for it? Also, is there a firmware
>>> limit on
>>> the size of a drive that could be put in it?
>>
>> First - the power supply is a bog standard ATX part if I remember
>> correctly so if it's too small you can easily upgrade it. Then, if
>> there is a limit in the firmware that only limits where you can put
>> the loaders and the kernel, it does not keep NetBSD from accessing
>> the whole disk.
>
> So, the powersupply shouldn't be an issue. Is the motherboard standard
> form factor too? Maybe I could put it into another case.

Have a look, I'd almost bet it's pretty close to ATX.

>>> The Ultra 60 looks like a better system and should easily be able
>>> to hold 4 drives, although it would be more exspensive to colo.  
>>> Is there a big
>>> advantagee to having 2 cpus and the larger case? Is there an option
>>> to put the motherboard into a smaller case?
>>
>> We don't currently support SMP on sparc64 and there's not much room
>> in the U60 for IDE drives.
>> It has two dedicated SCA bays, you'd need at least one SCA drive to
>> boot from since there's no onboard IDE and finding an IDE or SATA
>> card with fcode ROM could be difficult.
>
> Is there good support for a SATA card (if I wasn't trying to boot  
> off of
> it)? This could be a good solution to possible performance issues  
> that I
> have now.

Any SATA card otherwise supported by NetBSD should work.

>> The U60 is better in several ways though:
>> - - it can take 2GB RAM
>> - - the CPUs can have up to 4MB cache
>> - - you get four 64bit PCI slots, one 66MHz capable
>> Downsides:
>> - - it will suck more power than a Blade 100
>> - - you need a card to hook up IDE drives ( although you'd probably
>> want one for the Blade as well, the onboard IDE controller isn't that
>> fast IIRC )
>
> This is true in either case. I would want to put in a controller that
> could handle 500 gb drives. I have read that you had to have 5 volt  
> cards
> for the Sun Blade 100. Do you know if this is true?

Probably. The 66MHz slot in the U60 runs at 3.3v though ( and 32bit /  
33MHz cards do work in there as long as they can deal with 3.3v )

> Also, I have been using an ATTO SCSI controller and an intel 100+ pro
> ethernet card in a mac running NetBSD. Both seem to work incredibly
> reliably. Would they work equally as well in a Sun?

Very likely. I don't know what exact kind of ethernet controller the  
Blade has on its mainboard but the U60 has a hme, one of the nicest  
fast ethernet NICs around.

have fun
Michael

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)

iQEVAwUBR7BFGMpnzkX8Yg2nAQIiLQf/a0cJARQ++i1iBS9teEcbLeyw7/3ExMPX
9KdZWbfIyxjCzJDvI4bLIZh79WqI2WFJ1vYLPVlOqep0+kqDsjL0ZIhSjIPlCSfG
jMqq1qzqtP3zNqSwPtqqVs7HlzT5hLEXTD9PnSloLVBvs3HplQGCg8HyFFZxWmSy
qQB+dnCBV4hi0UUinJm+4QqvfihZ7rB36Lj+OCvXV/2WDR21ZeTJrPgQGJqpHpTo
LPr/xYGXsfzZG9rJiIaP5hAhQrlYmUw0is7fkElgo3J/ixbm+FFfO+uas/zVnnuZ
rPQAPqZ+qlS9nqntqW+NdbQiAFiL+oBZ7M1Hss+VcJmlVeGgjuBnBQ==
=m6pN
-----END PGP SIGNATURE-----