Subject: Re: Blade 100 USB keyboard problems
To: Michael <macallan18@earthlink.net>
From: rivo nurges <rix@estpak.ee>
List: port-sparc64
Date: 12/18/2005 16:16:28
On Sun, Dec 18, 2005 at 10:25:30AM -0500, Michael wrote:
> In order to have a chance of fixing this it would be nice if everyone
> with a Blade 100 - working or not - would post the following things:
Nonworking blade100 with OBP 4.17.1
> - OF properties of the PCI bridge and the USB controller ( and any
> device known to have trouble at some point )
ok pwd
/pci@1f,0
ok .properties
available 81000000 00000000 00000a30 00000000
000000d0 81000000 00000000 00000c00
00000000 00000400 81000000 00000000
00002000 00000000 0000e000 82000000
00000000 00428000 00000000 00018000
82000000 00000000 00460000 00000000
003a0000 82000000 00000000 01400000
00000000 00c00000 82000000 00000000
0b000000 00000000 55000000 82000000
00000000 80000000 00000000 40000000
82000000 00000000 e0000000 00000000
10000000
bus-range 00 00 00 00 00 00 00 02
interrupt-map 00000800 00000000 00000000 00000002 f005f408 00000006
00000800 00000000 00000000 00000003 f005f408 0000001c
00000800 00000000 00000000 00000004 f005f408 00000024
00001000 00000000 00000000 00000001 f005f408 0000000f
00001800 00000000 00000000 00000001 f005f408 0000001e
00004000 00000000 00000000 00000001 f005f408 00000023
00006000 00000000 00000000 00000002 f005f408 00000006
00006000 00000000 00000000 00000003 f005f408 0000001c
00006000 00000000 00000000 00000004 f005f408 00000024
00006800 00000000 00000000 00000001 f005f408 0000000c
00003800 00000000 00000000 00000001 f005f408 0000002a
00003800 00000000 00000000 00000002 f005f408 00000027
00003800 00000000 00000000 00000003 f005f408 00000021
00003800 00000000 00000000 00000004 f005f408 0000002b
00003800 00000000 00000000 00000005 f005f408 00000020
00009800 00000000 00000000 00000001 f005f408 0000000f
interrupt-map-mask 00fff800 00000000 00000000 00000007
#interrupt-cells 00000001
virtual-dma c0 00 00 00 20 00 00 00
reg 000001fe 00000000 00000000 00010000
000001fe 01000000 00000000 00000100
ranges 00000000 00000000 00000000 000001fe 01000000 00000000
01000000
01000000 00000000 00000000 000001fe 02000000 00000000
01000000
02000000 00000000 00000000 000001ff 00000000 00000001
00000000
03000000 00000000 00000000 000001ff 00000000 00000001
00000000
#virtual-dma-size-cells 00000001
#virtual-dma-addr-cells 00000001
clock-frequency 01f78a40
latency-timer
button-interrupt
no-streaming-cache
interrupts 00000030
0000002e
0000002f
00000025
upa-portid 0000001f
bus-parity-generated
compatible pci108e,a001
name pci
device_type pci
#address-cells 00000003
#size-cells 00000002
ok pwd
/pci@1f,0/ide@d
ok .properties
assigned-addresses 81006810 00000000 00000a00 00000000 00000008
81006814 00000000 00000a18 00000000 00000008
81006818 00000000 00000a10 00000000 00000008
8100681c 00000000 00000a08 00000000 00000008
81006820 00000000 00000a20 00000000 00000010
reg 00006800 00000000 00000000 00000000 00000000
01006810 00000000 00000000 00000000 00000008
01006814 00000000 00000000 00000000 00000004
01006818 00000000 00000000 00000000 00000008
0100681c 00000000 00000000 00000000 00000004
01006820 00000000 00000000 00000000 00000010
compatible pci10b9,5229.c3
pci10b9,5229
pciclass,0101ff
pciclass,0101
#address-cells 00000002
device_type ide
name ide
fast-back-to-back
devsel-speed 00000001
class-code 000101ff
interrupts 00000001
latency-timer 00000040
cache-line-size 00000000
max-latency 00000004
min-grant 00000002
revision-id 000000c3
device-id 00005229
vendor-id 000010b9
ok pwd
/pci@1f,0/usb@c,3
ok .properties
assigned-addresses 82006310 00000000 02000000 00000000 01000000
82006330 00000000 01000000 00000000 00400000
sunw,find-fcode f009191c
maximum-frame# 0000ffff
reg 00006300 00000000 00000000 00000000 00000000
02006310 00000000 00000000 00000000 01000000
#size-cells 00000000
#address-cells 00000001
compatible pci108e,1103.1
pci108e,1103
pciclass,0c0310
pciclass,0c03
name usb
interrupts 00000004
fast-back-to-back
devsel-speed 00000001
class-code 000c0310
latency-timer 00000040
cache-line-size 00000010
max-latency 00000005
min-grant 0000000a
revision-id 00000001
device-id 00001103
vendor-id 0000108e
ok pwd
/pci@1f,0/network@c,1
ok .properties
assigned-addresses 82006110 00000000 00400000 00000000 00020000
82006130 00000000 00800000 00000000 00400000
shared-pins mii
interrupts 00000002
model SUNW,pci-eri
version 1.11
compatible pci108e,1101.1
pci108e,1101
pciclass,020000
pciclass,0200
device_type network
address-bits 00000030
max-frame-size 00004000
reg 00006100 00000000 00000000 00000000 00000000
02006110 00000000 00000000 00000000 00008000
name network
fast-back-to-back
devsel-speed 00000001
class-code 00020000
latency-timer 00000040
cache-line-size 00000010
max-latency 00000005
min-grant 0000000a
revision-id 00000001
device-id 00001101
vendor-id 0000108e
> - OF version
ok .version
Release 4.17.1 created 2005/04/11 14:31
OBP 4.17.1 2005/04/11 14:31
POST 2.0.1 2001/08/23 17:13
OBDIAG 4.17.1 2005/04/11 14:36
> - dmesg output
console is usb-keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.99.14 (GENERIC) #1: Sun Dec 18 14:38:24 UTC 2005
rix@:/sys/arch/sparc64/compile/GENERIC
total memory = 1024 MB
avail memory = 992 MB
bootpath: /pci@1f,0/ide@d,0/disk@0,0
mainbus0 (root): SUNW,Sun-Blade-100: hostid 831daf91
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 10c4000 to 1144000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci0
dev 3 function 0 not configured
gem0 at pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:1d:af:91, 2KB RX fifo, 2KB TX fifo
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sun Microsystems FireWire controller (Firewire serial bus, interface 0x10,
revision 0x01) at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device
(rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat
Stereo
audio0 at autri0: full duplex, mmap, independent
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppb0 at pci0 dev 5 function 0: Intel S21152BB PCI-PCI Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intergraph product 0x07a0 (VGA display) at pci1 dev 0 function 0 not configured
ppb1 at pci1 dev 2 function 0: Digital Equipment DC21152 PCI-PCI Bridge (rev.
0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci2 dev 0
function 0 not configured
hme0 at pci2 dev 0 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3005
hme0: Ethernet address 00:03:ba:1d:af:91
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isp0 at pci2 dev 4 function 0: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at ivec 1815
isp0: invalid NVRAM header
scsibus0 at isp0: 16 targets, 8 luns per target
machfb0 at pci0 dev 19 function 0: ATI Technologies Rage XL (rev. 0x27)
machfb0: 16 MB aperture at 0x0a000000, 4 KB registers at 0x00426000
machfb0: memctl 10a57a3b
machfb0: ref_freq=29.498MHz
machfb0: 8188 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz
machfb0: initial resolution 1152x864 at 8 bpp
machfb0: initializing the DSP
wsdisplay1 at machfb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (default)
pcons0 at mainbus0
No counter-timer -- using %tick at 502MHz as system clock.
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0aceride0:0:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
: <ST320011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
uhub0: device problem, disabling port 2
aceride0:0:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
uhub0: device problem, disabling port 4
aceride0:0:0: lost interrupt
type: ata tc_bcount: 0 tc_skip: 0
wd0: drive supports PIO mode 4aceride0:0:0: lost interrupt
type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2aceride0:0:0: lost interrupt
type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 5 (Ultra/100)aceride0:0:0: lost interrupt
type: ata tc_bcount: 0 tc_skip: 0
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
aceride0:0:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:0: lost interrupt
type: ata tc_bcount: 0 tc_skip: 0
root on wd0a dumps on wd0b
--
rix
http://www.ripe.net/perl/whois?rix@estpak.ee