Hi All,

I have an E3500 here with 6x400MHz USPARCII and 5GB of RAM.  I am happy 
to report that it does work, but there are some things missing.  For 
example the kernel recognizes all the RAM but can only use what's on the 
first CPU board.  Also, this machine has two sbus-es, so I had to change 
"sbus0 at mainbus0" to "sbus* at mainbus0" in the GENERIC32 config.

I am not surprised that the fibre channel controller (SUNW,socal) is not 
supported.  Is there any hope of it being supported in the future?

I am not much of a kernel hacker but I would be happy to test patches as 
this machine is not in production yet.  I am especially interested in MP 
support; if I can get this machine to a reasonably working state then I 
can convince my employer to have it run NetBSD full-time.

-Henry Bent

--

NetBSD 3.99.11 (GENERIC) #1: Fri Nov 18 20:29:42 EST 2005
         root@hbent3:/usr/obj/src-current/sys/arch/sparc64/compile/GENERIC
total memory = 5120 MB
avail memory = 975 MB
bootpath: /sbus@3,0/SUNW,hme@3,8c00000
mainbus0 (root): SUNW,Ultra-Enterprise: hostid 80bd15a7
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 400 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 8192K external (64 b/l)
cpu at mainbus0 not configured
cpu at mainbus0 not configured
cpu at mainbus0 not configured
cpu at mainbus0 not configured
cpu at mainbus0 not configured
central at mainbus0 not configured
fhc at mainbus0 not configured
fhc at mainbus0 not configured
fhc at mainbus0 not configured
sbus0 at mainbus0 addr 0xffd9e000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: 1cba000 to 1cbc000
SUNW,socal at sbus0 slot 13 offset 0x10000 vector 22 ipl 2 not configured
fhc at mainbus0 not configured
timer0 at mainbus0 addr 0xffd81c00 irq vectors b0 and b1
sbus1 at mainbus0 addr 0xffd76000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: 1cbc000 to 1cbe000
hme0 at sbus1 slot 3 offset 0x8c00000 vector 4 ipl 6: Sun Happy Meal 
Ethernet (SUNW,hme)
hme0: Ethernet address 08:00:20:bd:15:a7
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
esp0 at sbus1 slot 3 offset 0x8800000 vector 3 ipl 3: FAS366/HME, 40MHz, 
SCSI ID 7
scsibus0 at esp0: 16 targets, 8 luns per target
hme1 at sbus1 slot 0 offset 0x8c00000 vector 4 ipl 6: Sun Happy Meal 
Ethernet (SUNW,hme)
hme1: Ethernet address 08:00:20:bd:15:a7
nsphy1 at hme1 phy 1: DP83840 10/100 media interface, rev. 1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
timer1 at mainbus0 addr 0xffd67c00 irq vectors f0 and f1
pcons0 at mainbus0
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> cdrom 
removable
cd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers