Hi Michael,

Thanks for your reply!

> The switch to wscons happened with 3.0

I tried current too, which should include that code I suppose.

> What does your dmesg output say about USB, the keyboard and so on? I
> have a Type6 USB here which just works on my U10. Does the console
> framebuffer ( machfb at pci ... ) attach properly?

machfb goes fine, here's the whole dmesg, which I got from the serial line:

Boot device: /pci@1f,0/ide@d/cdrom@2,0:f  File and args:
NetBSD IEEE 1275 Bootblock
..
 >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.8
 >> (test2@ascent, Tue Oct 18 12:39:00 CEST 2005)
devopen: getdisklabel returned no disk label
devopen: search_label returned no disk label
|/-\|loadfile: reading header
elf64_exec: Booting /pci@1f,0/ide@d/cdrom@2,0:f/netbsd
symbols @ 0xfff06480  start=0x1000000
chain: calling OF_chain(800000, cd38, 1000000, fff63a80, 18)
Kernel size exceeds 4MB
console is /pci@1f,0/isa@7/serial@0,3f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 3.99.10 (INSTALL) #0: Tue Oct 18 12:53:54 CEST 2005
	test2@ascent:/home/test2/src/_obj/sys/arch/sparc64/compile/INSTALL
total memory = 512 MB
avail memory = 488 MB
bootpath: /pci@1f,0/ide@d,0/cdrom@2,0:f
mainbus0 (root): SUNW,Sun-Blade-100: hostid 83087dc6
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 854000 to 8d4000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
gem0 at pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:08:7d:c6, 2KB RX fifo, 2KB TX fifo
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sun Microsystems FireWire controller (Firewire serial bus, interface 
0x10, revision 0x01) at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) 
at pci0 dev 3 function 0 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller 
Audio Device (rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices 
Phat Stereo
audio0 at autri0: full duplex, mmap, independent
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppb0 at pci0 dev 5 function 0: Digital Equipment DC21152 PCI-PCI Bridge 
(rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
machfb0 at pci0 dev 19 function 0: ATI Technologies Rage XL (rev. 0x27)
machfb0: 16 MB aperture at 0x03000000, 4 KB registers at 0x00426000
memctl: 10a57a3b
ref_freq=29.498MHz
machfb0: 8188 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz
machfb0: initial resolution 1152x864 at 8 bpp
initializing the DSP
wsdisplay1 at machfb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (default)
pcons at mainbus0 not configured
No counter-timer -- using %tick at 502MHz as system clock.
Kernelized RAIDframe activated
md0: internal 5120 KB image area
atapibus0 at atabus0: 2 targets
aceride0:0:1: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
cd0 at atapibus0 drive 1: <LTN485S, , JOU2> cdrom removable
aceride0:0:1: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:1: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:1: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
cd0: drive supports PIO mode 4aceride0:0:1: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2aceride0:0:1: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0aceride0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
: <ST315320A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14594 MB, 29651 cyl, 16 head, 63 sec, 512 bytes/sect x 29888820 sectors
aceride0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
aceride0:0:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
wd0: drive supports PIO mode 4aceride0:0:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2aceride0:0:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 4 (Ultra/66)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus1 at atabus1: 2 targets
aceride0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
cd1 at atapibus1 drive 0: <JLMS DVD-ROM LTD-166S, , DS0E> cdrom removable
aceride0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
aceride0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
aceride0:1:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
cd1: drive supports PIO mode 4aceride0:1:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2aceride0:1:0: lost


mvg,

Wouter

-- 
Er was eens een boer. Hij had 3 koeien, 2 witte en 1 witte.
Maar dat gaf niet, want de koe gaf ook niet.  De boer vond een
horloge, de koe vond van niet.  Ra-ra kameel politiepet.