--yLVHuoLXiP9kZBkt
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Fri, Jun 10 2005 - 15:42, franceschini_a@tiscali.it wrote:
> On Fri, Jun 10, 2005 at 10:42:46AM +0200, Joel CARNAT wrote:
> > On Fri, Jun 10 2005 - 10:22, Martin Husemann wrote:
> > > On Fri, Jun 10, 2005 at 09:23:49AM +0200, franceschini_a@tiscali.it w=
rote:
> > >=20
> > > > 	I tried many different versions up to 2.0.2.
> > >=20
> > > Your problem sounds like interrupt issues - could you try a 3.0_BETA?
> > > There should be builds available on ftp.netbsd.org and it's mirrors,
> > > in /pub/NetBSD-daily/netbsd-3 IIUC, but there is not much there yet.
> > >=20
> >=20
> >  looks like there is no sparc64 snap yet :(
> >  franceschini_a, you can download an iso I used to install my Ultra5 (M=
ay, 10th).
> >  I didn't compile X but it should be enough to check if 3.0_BETA is OK =
for your SunBlade.
> >  http://tumfatig.net/NetBSD-3.0_BETA.iso (84Mo)
>=20
> Hi Joel,
>=20
> 	I tried your kernel (thanks) but the problem is still the same :(
>=20

 sounds sad :-(
 aceride0 looked familiar to me... so I poweron my (noisy) V100.
 it's booting NetBSD correctly and ... *** has *** aceride0.
 here's the boot message :
########################################################################
NetBSD 3.0_BETA (GENERIC) #1: Tue May 10 00:35:37 CEST 2005
        ptijo@bagheera.tumfatig.net:/usr/obj/sys/arch/sparc64/compile/GENER=
IC
total memory =3D 256 MB
avail memory =3D 238 MB
bootpath: /pci@1f,0/ide@d,0/disk@2,0
mainbus0 (root): SUNW,UltraAX-i2: hostid 833008aa
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 548 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 80000000
IOTSB: c0426000 to c04a6000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819
power at ebus0 addr 2000-2007 ipl 35 not configured
SUNW,lomh at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, working fifo
flashprom at ebus0 addr 0-7ffff not configured
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at =
pci0 dev 3 function 0 not configured
tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:03:ba:30:08:aa
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000676, model 0x0004, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp1: broken MicroWire interface detected; setting SROM size to 1Kb
tlp1: interrupting at ivec 301c
tlp1: Ethernet address 00:03:ba:30:08:aa
ukphy1 at tlp1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000676, model 0x0004, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (r=
ev. 0x03)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
pcons at mainbus0 not configured
No counter-timer -- using %tick at 548MHz as system clock.
Kernelized RAIDframe activated
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <CD-224E, , P.9A> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus1 drive 0: <WDC WD400BB-22DEA0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd0(aceride0:1:1): using PIO mode 4, DMA mode 2 (using DMA)
root on wd0a dumps on wd0b
root file system type: ffs
Fri Jun 10 17:29:08 CEST 2005
swapctl: adding /dev/wd0b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: thundera.tumfatig.net
=2E..
########################################################################

 it looks the same as yours (expect mine works :)
 could it be hardware failure ?
 I mean... does it work OK with Solaris/OpenBSD/Linux/... ?
 Have you done something with the disk (maybe changed master/slave jumper) ?

 Maybe a PROM issue ?
 Mine has not been updated and is :
########################################################################
ok .version
Firmware CORE Release 1.0.18 created 2002/5/23 18:22
Release 4.0 Version 18 created 2002/05/23 18:22
cPOST version 1.0.18 created 2002/5/23
CORE 1.0.18 2002/05/23 18:22
########################################################################

 Hope it helps.
	Jo
--=20
,- This mail runs ------.
`--------- NetBSD/i386 -'

--yLVHuoLXiP9kZBkt
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (NetBSD)

iD4DBQFCqbNk0/VH7L7F7Y4RAgauAJiR+Ro6U8heZsKT2AbyTDJ1RCnkAJ46+0YV
efUnn+fdgC82HY8AieW80Q==
=LAts
-----END PGP SIGNATURE-----

--yLVHuoLXiP9kZBkt--