On May 23, 2004, at 4:55 PM, Martin Husemann wrote:

> US III machines are not supported, but we can only partly blame that on
> missing specs. There are (big) black holes in the specs, e.g. the PCI 
> root
> bridge seems to be undocumented, but the CPUs themselfs are documented 
> now.

Bummer.

> So if you enjoy low-level kernel hacking and have a machine, or would 
> like
> to donate a dual blade 2K with lots of memory - I'll pay the shipping 
> ;-}

Alas, the fastest computer I own is (arguably) the Ultra 30 I just 
picked up.

In any case, I've done my research and narrowed down the list.  Any 
idea if the following UltraSPARC II, IIi, or IIe systems work with 
NetBSD?

- SPARCengine Ultra AXdp
- Netra CP2020
- Netra CP2040, Netra CP2060, Netra CP2080 system boards
- Netra CP2140 system board (Netra CT410 and CT810)
- Netra CP2300 system board (Netra CT820)
- SPARCengine Ultra AX-MP and AX-MP+ (a.k.a. AXmp and AXmp+)
- Fire B100s Blade (Fire B1600 chassis)

The following have had spurious reports of testing.  Do they really 
work with 2.0?
- Enterprise (3000, 3500, 4000, 4500, 500x, 5500, 600x, 6500, 10000)
- Blade 100 and 150

The following AFAICT work as advertised:
- Ultra 1 family (Ultra 1, Ultra 1 Creator, Ultra 1 Creator 3D,
    Netra i 150, Netra nfs 150, Enterprise 1, Enterprise 150)
- Ultra 2 family (Ultra 2, Ultra 2 Creator, Ultra 2 Creator 3D, 
Enterprise 2)
- Ultra 5/10 family (Ultra 5, Ultra 10, Enterprise 5, and Enterprise 10)
- Ultra 30 family (Ultra 30, Netra T 1100)
- Ultra 60 family (Ultra 60, E220R, Netra T 1120 and 1125)
- Ultra 80 family (Ultra 80, E420R, Netra T 1400 and T 1405)
- Ultra 250 family (Enterprise 250 and E250R)
- Ultra 450 family (Ultra 450, Enterprise 450, and Netra ft 1800)
- SPARCengine CP1400 or SPARCengine CP1500 system boards
    (Netra T1 (models 100 and 105), CT400, CT800, or CT1600)
- SPARCengine Ultra AXi family (Netra X1, Fire v100, Fire v120, Netra 
120,
    Netra AC 200, Netra DC 200)
- SPARCengine Ultra AXe system board

   -- MW