hi,

i'm in trouble with a Sun Ultra 10 getting X running on it :( [see dmsg 
below)

google does not find _good_ examples on this topic, so i ask here...

there is not special thing like dual head (you might notice that this 
machine has creator _and_ on board ATI gfx) required, just plain X on 
that creator...

is anybody able to provide me an example of a running config?

tia & regards,

timo

the dmsg:

zoidberg: {1} dmesg
console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 1.6ZG (GENERIC) #0: Tue Dec 30 12:21:06 CET 2003
         root@zoidberg:/usr/obj/sys/arch/sparc64/compile/GENERIC
total memory = 256 MB
avail memory = 226 MB
using 1651 buffers containing 13208 KB of memory
bootpath: /pci@1f,0/pci@1,1/ide@3,0/disk@0,0
mainbus0 (root): SUNW,Ultra-5_10
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 333 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 
b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 11376000 to 113f6000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems, Inc. Simba PCI bridge 
(rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
com0: console
kbd0 at com0 (console input)
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 
39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80b08aa8
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 
722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:b0:8a:a8
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ATI Technologies 3D Rage Pro (VGA display, revision 0x5c) at pci1 dev 2 
function 0 not configured
cmdide0 at pci1 dev 3 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
ppb1 at pci0 dev 1 function 0: Sun Microsystems, Inc. Simba PCI bridge 
(rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
tlp0 at pci2 dev 1 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at ivec 10
tlp0: Ethernet address 00:00:cb:56:0d:0d
dmphy0 at tlp0 phy 8: DM9101 (AMD Am79C873) 10/100 media interface, 
rev. 2
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
SUNW,ffb at mainbus0 addr 0xfebee000 not configured
pcons at mainbus0 not configured
No counter-timer -- using %tick at 333MHz as system clock.
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0: <ST39140A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 8693 MB, 17662 cyl, 16 head, 63 sec, 512 bytes/sect x 17803440 
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data 
transfers)
cd0(cmdide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data 
transfers)
wd1 at atabus1 drive 0: <Maxtor 90648D3>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 6179 MB, 12556 cyl, 16 head, 63 sec, 512 bytes/sect x 12656448 
sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd1(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data 
transfers)