I've got a little dinky Netra that I'm trying to install the latest 
snapshot on. I can get the installer netbooted, but my IDE hard drive isn't 
being detected. (Solaris saw it just fine). Here's a bootup log if this 
helps anyone... anyone seen this before? Is this the issue that Matthew 
Green posted that he was fixing?

Thanks,

Kevin


Verifying NVRAM...Done
Bootmode is 0
MCR0 = 16a0b004
MCR1 = c0804000
MCR2 = f80a000
MCR3 = 202
Ecache Size = 256 KB
NVRAM Test
Icache Test
Dcache Test
MMU Test
Ecache Tag Addr Test
Ecache RAM Addr Test
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x60000000
MEMSIZE=0x8000000
Data Line Test
Core Memory Test
Clearing memory...including Unix retained memory...Done
Turing ON MMUs Done
Copy ROM to RAM (148440 bytes) Done
Orig PC=0x1fff0007efc  New PC=0xf0f07f54
Processor Speed=400MHz
Memory Data Line Test
Memory Addr Line w/ Ecache Test
ECC Block Memory Test
Looking for Dropin cPOST ... found
Decompressing Client Done
Transferring control to Client...

Sun Microsystems, Inc.     cPOST
@(#) cpost 1.0.1 2001/02/19 09:55

All Basic UltraSPARC IIe PBM Tests
         Init CPU PBM
         PIO Decoder And BCT Test
         CPU IOMMU Reg Test
         CPU IOMMU RAM NTA Test
         CPU IOMMU CAM NTA Test
         CPU IOMMU RAM Address Test
         CPU IOMMU CAM Address Test
         IOMMU TLB Compare Test
         IOMMU TLB Flush Test
         PBM Control/Status Reg Test
         PBM Diag Reg Test
         CPU PBM Reg Test

DM9102A Ethernet #1 Config Space Reg Test
DM9102A Ethernet #2 Config Space Reg Test
Basic SouthBridge Tests
         Southbridge ISA Config Space Reg Test
         Southbridge PMU Config Space Reg Test
         Southbridge IDE Config Space Reg Test
         Southbridge USB Config Space Reg Test
All Memory Stress Tests
         Consist Write Data Test
Resetting...

Processor Speed = 400 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)

Firmware CORE  Sun Microsystems, Inc.
@(#) core 1.0.1 2001/02/19 09:55
Software Power ON
Verifying NVRAM...Done
Bootmode is 0
MCR0 = 16a0b004
MCR1 = c0804000
MCR2 = f80a000
MCR3 = 202
Ecache Size = 256 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x60000000
MEMSIZE=0x8000000
Clearing memory...Done
Turing ON MMUs Done
Copy ROM to RAM (148440 bytes) Done
Orig PC=0x1fff0007efc  New PC=0xf0f07f54
Processor Speed=400MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe (256 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers:
Probing /pci@1f,0 Device 7  isa dma rtc power SUNW,lomh serial serial
    flashprom
Probing /pci@1f,0 Device 3  pmu i2c temperature dimm i2c-nvram idprom
    motherboard-fru ppm beep fan-control
lomp
Probing Memory Bank #0   0 Megabytes
Probing Memory Bank #1   0 Megabytes
Probing Memory Bank #2   0 Megabytes
Probing Memory Bank #3 128 Megabytes
Probing /pci@1f,0 Device 7
Probing /pci@1f,0 Device 3
Probing /pci@1f,0 Device c  ethernet
Probing /pci@1f,0 Device 5  ethernet
Probing /pci@1f,0 Device a  usb
Probing /pci@1f,0 Device d  ide disk cdrom
Sun Netra X1 (UltraSPARC-IIe 400MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed, Serial #50649666.
Ethernet address 0:3:ba:4:da:42, Host ID: 8304da42.



Environment monitoring: disabled
Boot device: net  File and args:
Using Onboard Transceiver - Link Up.
14e00
Server IP address: 66.92.133.149
Client IP address: 66.92.133.145
 >> NetBSD/sparc64 OpenFirmware Boot, Revision
 >> (mthomas@blade.os.allegronetworks.com, Tue Sep  3 14:12:54 PDT 2002)
Using Onboard Transceiver - Link Up.
net_open: client addr: 66.92.133.145
net_open: subnet mask: 255.255.255.0
net_open: net gateway: 66.92.133.149
net_open: server addr: 66.92.133.149
net_open: server path: /tftpboot
Using BOOTP protocol: ip address: 66.92.133.145, hostname: sun, netmask: 
255.255.255.0, gateway: 66.92.133.149
root addr=66.92.133.149 path=/tftpboot
loadfile: reading header
elf64_exec: Booting /pci@1f,0/ethernet@c/netbsd
4545048@0x1000000+5401040@0x1800000+2987568@0x1d269d0
symbols @ 0xfff78280 74 start=0x1000000
chain: calling OF_chain(800000, e568, 1000000, fffc5a80, 18)
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Kernel size exceeds 4MB
consinit()
setting up stdin
chosen = f002d93c, stdin @ 0x181a9d8
stdin instance = fffbda80
stdin node = f0075d40
setting up stdout
stdout instance = fffbd838
stdout package = f0075d40
buffer @ 0x2009d90
console is /pci@1f,0/isa@7/serial@0,3f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 1.6G (INSTALL) #1: Tue Sep  3 15:38:29 PDT 2002
     mthomas@blade.os.allegronetworks.com:/u1/obj/sys/arch/sparc64/compile/INSTALL
total memory = 128 MB
avail memory = 104 MB
using 832 buffers containing 6656 KB of memory
bootpath: /pci@1f,0/ethernet@c,0
mainbus0 (root): SUNW,UltraAX-i2
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 400 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 256K external 
(64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
intr_establish: intr reused 7c0
DVMA map: 60000000 to 80000000
IOTSB: 60986000 to 60a06000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: ds1287
power at ebus0 addr 2000-2007 ipl 35 not configured
SUNW,lomh at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43intr_establish: intr reused 7eb
: ns16550a, working fifo
flashprom at ebus0 addr 0-7ffff not configured
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at 
pci0 dev 3 function 0 not configured
tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:03:ba:04:da:42
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000676, model 0x0004, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp1: broken MicroWire interface detected; setting SROM size to 1Kb
interrupt_vector: vector 7de NULL
tlp1: interrupting at ivec 301c
tlp1: Ethernet address 00:03:ba:04:da:42
ukphy1 at tlp1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000676, model 0x0004, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB Host Controller (rev. 
0x03)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pciide0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller 
(rev. 0xc3)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using ivec 180c for native-PCI interrupt
pciide0: disabling primary channel (no drives)
pciide0: secondary channel configured to native-PCI mode
pciide0: disabling secondary channel (no drives)
pcons at mainbus0 not configured
No counter-timer -- using %tick at 400MHz as system clock.
Using %tick -- intr in 4000000 cycles...done.
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for raid components...
md0: internal 5120 KB image area
root on md0a dumps on md0b
mountroot: trying msdos...
mountroot: trying cd9660...
isofs: session offset (part 0) 0
mountroot: trying lfs...
mountroot: trying nfs...
mountroot: trying ffs...
rtc_gettime: read c 14/20 y 2/2 m b/11 wd 5 d e/14 h 8/8 m 35/53 s 2a/42
WARNING: clock gained 71 days -- CHECK AND RESET THE DATE!
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
erase ^?, werase ^W, kill ^U, intr ^C

Terminal type (just hit ENTER for 'sun'):