Netra-T1, Sep 26 source.

Only one eri and phy were detected, and the ethernet address of
gem0 is bogus.

The pciide0 PCI/ISA bridge warning is a little strange .. why would
a PCI/ISA bridge be expected on a machine with no ISA bus?

And also, just curious - why is the driver called 'gem'?

g.


NetBSD 1.5Y (GENERIC) #0: Thu Sep 27 12:52:39 EST 2001
    grant@tinkerbell:/usr/src/sys/current/arch/sparc64/compile/GENERIC
total memory = 256 MB                                                 
avail memory = 226 MB
using 1651 buffers containing 13208 KB of memory
bootpath: /pci@1f,0/pci@1,1/network@c,1         
mainbus0 (root): SUNW,UltraAX-i2       
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 8192K external (64 b/l) 
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
intr_establish: intr reused 7c0                                   
DVMA map: c0000000 to e0000000 
pci0 at psycho0               
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1                                                          
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 12 function 0      
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured            
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 0
ebus_attach: idprom: incomplete               
SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured
gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: Ethernet address 00:00:00:00:00:00                                 
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1               
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: using ivec 3006 for interrupt                         
ohci0 at pci1 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci1 dev 3 function 0 not configured
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci1 dev 3 function 0 not configured
ebus1 at pci1 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
power at ebus1 addr 2000-2007 ipl 37 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43intr_establish: intr reused 7eb
: ns16550a, working fifo
pciide0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
pciide0: bus-master DMA support present
pciide0: can't find PCI/ISA bridge, downgrading to Ultra/33
pciide0: primary channel configured to native-PCI mode
pciide0: using ivec 180c for native-PCI interrupt
pciide0: disabling primary channel (no drives)
pciide0: secondary channel configured to native-PCI mode
pciide0: disabling secondary channel (no drives)
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
siop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
siop0: using on-board RAM
siop0: interrupting at ivec 20
scsibus0 at siop0: 16 targets, 8 luns per target
siop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
siop1: using on-board RAM
intr_establish: intr reused 7e0
siop1: interrupting at ivec 20
scsibus1 at siop1: 16 targets, 8 luns per target
pcons at mainbus0 not configured
No counter-timer -- using %tick at 500MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST318404LSUN18G, 4203> SCSI3 0/direct fixed
sd0: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
sd0: sync (25.0ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
scsibus1: waiting 2 seconds for devices to settle...
Kernelized RAIDframe activated
root device: