hi,

i was playing little bit with Sun Blade 100 today but i could not force it to
boot. someone has better experience with it? is someone working on support for
blade 100?

kernel: NetBSD-1.5.1_BETA2 and NetBSD-1.5V
serial console:

Sun Blade 100 (UltraSPARC-IIe), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #50881228.
Ethernet address 0:3:ba:8:62:cc, Host ID: 830862cc.

Rebooting with command: boot disk:b netbsd -s                         
Boot device: /pci@1f,0/ide@d/disk@0,0:b  File and args: netbsd -s
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision 
>> (martin@setting-sun.duskware.de, Fri May 18 08:09:34 CEST 2001)
loadfile: reading header
elf64_exec: Booting /pci@1f,0/ide@d/disk@0,0:b/netbsd
3301029@0x1000000+221392@0x1400000+433440@0x14360d0 
symbols @ 0xfef8a300 74+244944+126870 start=0x1000000
chain: calling OF_chain(800000, ee30, 1000000, fff63a80, 18)
[ preserving 372664 bytes of netbsd ELF symbol table ]
pmap_bootstrap: could not claim physical dseg extention at 2fca0000 size
360000
consinit()
setting up stdin
stdin instance = fff5b988
setting up stdout
stdout instance = fff5bde0
stdout package = f007264c
data fault: pc=f0008ff0 addr=665fffffff0 sfsr=%qb
kernel trap 30: data access exception            
Stopped in  at  0xf0008ff0:     ld              [%g4 + 0x0], %l0
db>

when trying to boot with keyboard:

Rebooting with command: boot disk:b netbsd -s
Boot device: /pci@1f,0/ide@d/disk@0,0:b  File and args: netbsd -s
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision
>> (martin@setting-sun.duskware.de, Fri May 18 08:09:34 CEST 2001)
loadfile: reading header
elf64_exec: Booting /pci@1f,0/ide@d/disk@0,0:b/netbsd
3301029@0x1000000+221392@0x1400000+433440@0x14360d0
symbols @ 0xfef8a300 74+244944+126870 start=0x1000000
chain: calling OF_chain(800000, ee30, 1000000, fff63a80, 18)
[ preserving 372664 bytes of netbsd ELF symbol table ]
pmap_bootstrap: could not claim physical dseg extention at 2fca0000 size 
360000
consinit()
setting up stdin
stdin instance = fff33c10
setting up stdout
stdout instance = fff5b788
stdout package = f008fd54
console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.1_BETA2 (GENERIC) #1: Fri May 18 20:49:45 CEST 2001
    martin@setting-sun.duskware.de:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 512 MB
avail memory = 462 MB
using 3289 buffers containing 26312 KB of memory
bootpath: /pci@1f,0/ide@d,0/disk@0,0:b
mainbus0 (root): SUNW,Sun-Blade-100
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 8192K external (64
b/l)
pcons0 at mainbus0
No couter-timer -- using %tick at 502MHz as system clock.
Using tick -- intr in 5020000 cycles...done.
raidattach: Asked for 4 units
Kernelized RAIDframe activated
root device:

and this is continuing ad infinitum until i type 'halt' as argument
with kernel 1.5V is it the same. am i missing something or doing something
wrong? any suggestions/hints/experience with it?

thanks, bye

-- 
--   salo <salo@Xtrmntr.org>         ASCII Ribbon campaign against   /"\   --
--   http://Xtrmntr.org/salo.pgp     e-mail in gratuitous HTML and   \ /   --
--                                   Microsoft proprietary formats    X    --
--                                                                   / \   --