Subject: E3500 and Netra T1
To: None <port-sparc64@netbsd.org>
From: Andy Doran <ad@netbsd.org>
List: port-sparc64
Date: 08/24/2000 14:15:07
-- E3500 with 1 CPU board and 1 SBUS I/O board:

chain: calling OF_chain(800000, ef18, f1000000, fff6da80, 18)
[ using 368424 bytes of netbsd ELF symbol table ]
pmap_bootstrap: could not claim physical dseg extention at 3fca0000 size 360000
Fast Data Access MMU Miss
{6} ok power-off

-- Netra T1:

chain: calling OF_chain(800000, ef18, f1000000, fffa3a80, 18)
[ using 368424 bytes of netbsd ELF symbol table ]
Our trap handler is enabled
consinit()
setting up stdin
stdin instance = fff9b8a8
setting up stdout
stdout instance = fff9b5d8
stdout package = f006aa3c
console is unknown
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5E (GENERIC) #0: Sat Aug 19 04:19:06 EST 2000
    mrg@powerofseven.eterna.com.au:/orb/p/src/sys/arch/sparc64/compile/GENERIC
total memory = 256 MB
avail memory = 227 MB
using 832 buffers containing 13208 KB of memory
bootpath: /pci@1f,0/pci@1,1/network@1,1
mainbus0 (root): SUNW,UltraSPARC-IIi-cEngine
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 439.998 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 2048K external (64 b/l) 
psycho0 at mainbus0 addr 0xfffc0000
sabre: bus range 0 to 3; simba b, PCI bus 1; simba a, PCI bus 2
DVMA map: c0002000 to ffffe000
pci0 at psycho0
pci0: i/o space, memory space enabled
Sun Microsystems product 0x2000 (miscellaneous prehistoric) at pci0 dev 0 function 0 not configured
simba0 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at simba0 bus 2
pci1: i/o space, memory space enabled
Digital Equipment DECchip 21150 PCI-PCI Bridge (PCI bridge, revision 0x04) at pci1 dev 1 function 0 not configured
simba1 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at simba1 bus 1
pci2: i/o space, memory space enabled
ebus0 at pci2 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003 addr 728000-728003 addr 72a000-72a003 addr 72c000-72c003 addr 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
su at ebus0 addr 3803f8-3803ff ipl 60 not configured
su at ebus0 addr 3602f8-3602ff ipl 52 not configured
lpt0 at ebus0 addr 340278-340287 addr 30015c-30015d addr 700000-70000f ipl 34
fdthree at ebus0 addr 3203f0-3203f7 addr 706000-70600f addr 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid ffffffff80c284ce
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 36 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper at ebus0 addr 722000-722003 not configured
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
i2c at ebus0 addr 600000-600003 ipl 40 not configured
i2c at ebus0 addr 100000-100003 ipl 59 not configured
SUNW,lom at ebus0 addr 400000-400063 not configured
hme0 at pci2 dev 1 function 1: address 08:00:20:c2:84:ce
ukphy0 at hme0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00601d, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x00601d, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: using vector 33 for interrupt
siop0 at pci2 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at vector 32
scsibus0 at siop0: 16 targets, 8 luns per target
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci2 dev 3 function 0 not configured
hme1 at pci2 dev 3 function 1: address 08:00:20:c2:84:ce
ukphy2 at hme1 phy 0: Generic IEEE 802.3u media interface
ukphy2: OUI 0x00601d, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: using vector 26 for interrupt
pcons0 at mainbus0
No counter-timer -- using %tick at 439MHz as system clock.
Using tick -- intr in 4399989 cycles...done.
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAE3091L SUN9.0G, 0706> SCSI2 0/direct fixed
siop0: target 0 using 16bit transfers
siop0: target 0 now synchronous at 20.0Mhz, offset 16
sd0: 8637 MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sect x 17689267 sectors
raidattach: Asked for 4 units
Kernelized RAIDframe activated
root on hme0
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
nfs_boot: trying RARP (and RPC/bootparam)
revarp failed, error=51
mountroot: trying ffs...
no file system for hme0
cannot mount root, error = 79
root device (default hme0):