On Saturday 28 January 2006 23:20, Michael Lorenz wrote:
> Hello,
>
> please try this kernel:
> ftp://ftp.netbsd.org/pub/NetBSD/misc/macallan/sparc/netbsd_classic.bz2
>
> have fun
> Michael
Thanks a lot, wscons seems to work now - with one exception - I still can't
switch to the dvorak layout :(

 "wsconsctl -w encoding=3Dus.dvorak" fails with:
 "wsconsctl: "WSKBDIO_SETENCODING: Invalid argument"

The strange thing is that it works fine to switch between other layouts, su=
ch
as us and sv.

In case it's of any interest, here's the dmesg-log with the new kernel:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2=
006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.15 (CLASSIC) #0: Sat Jan 28 17:02:56 EST 2006
        ml@Inishowen:/stuff/build/obj_sparc/sys/arch/sparc/compile/CLASSIC
total memory =3D 65160 KB
avail memory =3D 61456 KB
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@4,8400000/esp@4,8800000/=
sd@3,0
mainbus0 (root): SUNW,SPARCstation-LX: hostid 80701bf1
cpu0 at mainbus0: TMS390S10 @ 50 MHz, on-chip FPU
cpu0: physical 4K instruction (32 b/l), 2K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08
timer0 at obio0 slot 0 offset 0xd00000: delay constant 23
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
zstty2 at zs1 channel 0 (console input)
kbd0 at zstty2 (console input)
zstty3 at zs1 channel 1
ms0 at zstty3
wsmouse0 at ms0 mux 0
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000val: c9

power at obio0 slot 0 offset 0x910000 level 2 not configured
SUNW,fdtwo at obio0 slot 0 offset 0x400000 level 11 not configured
iommu0 at mainbus0 addr 0x10000000: version 0x1/0x4, page-size 4096, range
64MB
sbus0 at iommu0: clock =3D 25 MHz
dma0 at sbus0 slot 4 offset 0x8400000: DMA rev 2
esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
bpp0 at sbus0 slot 4 offset 0xc800000 level 2 (ipl 3): DMA rev 2
ledma0 at sbus0 slot 4 offset 0x8400010: DMA rev 2
le0 at ledma0 slot 4 offset 0x8c00000 level 6: address 08:00:20:18:d3:3e
le0: 8 receive buffers, 2 transmit buffers
SUNW,lpvi at sbus0 slot 1 offset 0x300000 level 13 not configured
bpp1 at sbus0 slot 1 offset 0x200000 level 3: DMA rev esc
dbri0 at sbus0 slot 2 offset 0x10000 level 9: rev e
cgsix0 at sbus0 slot 3 offset 0x0 level 9: SUNW,501-1672, 1152 x 900, rev 8
(console)
cgsix0: attached to /dev/fb0
cgsix0: framebuffer size: 1 MB
cgsix0: FBC: 00229540
wsdisplay0 at cgsix0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
wskbd0 at kbd0: console keyboard, using wsdisplay0
dbri0: onboard CS4215 detected
dbri0: cs4215 ver 1 found at offset 0
audio0 at dbri0: half duplex, mmap
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 3 lun 0: <SEAGATE, ST11200N SUN1.05, 8808> disk fixe=
d
sd0: 1005 MB, 1872 cyl, 15 head, 73 sec, 512 bytes/sect x 2059140 sectors
sd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queuei=
ng
root on sd0a dumps on sd0b
root file system type: ffs