Just purchased a SS10 and net-installed Netbsd 1.6.1.At the installation =
i used the=20
GENERIC kernel (thus no SMP after the install).Once after the first boot =
i compiled a=20
custom kernel enabling the MP and i got the common " ledma0 =
errors"!Started playing=20
around with the conf but ended using the GENERIC.MP.
 Although it was reported that both CPUs (2 cpu modules exist) were =
initialized the=20
output of the top command showed only once CPU0 (2 compiles in =
progress).
 The story ended like this:
panic: nmi_hard: SMP botch.
After this the machine was paniced and rebooted, panic and reboot , =
panic and reboot=20
..


=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
top=20
load averages:  1.31,  1.30,  1.36                                       =
                                       =20
23:05:28
22 processes:  1 runnable, 20 sleeping, 1 on processor
CPU states: 39.0% user,  0.0% nice,  8.9% system,  0.7% interrupt, 51.4% =
idle
Memory: 45M Act, 4K Inact, 172K Wired, 1664K Exec, 39M File, 184M Free
Swap:=20
bash-2.05a# ME PRI NICE   SIZE   RES STATE      TIME   WCPU    CPU =
COMMAND
 1801 root      61    0   532K  976K RUN/0      0:00 34.00%  1.66% cpp0
 1800 root      10    0   136K  668K wait/0     0:00 11.00%  0.54% cc
  483 root      10    0  1724K 2212K wait/0     0:06  0.05%  0.05% make
  237 root       2    0   224K 1404K select/0   0:02  0.05%  0.05% =
telnetd
  544 root      28    0   208K  920K CPU/0      0:27  0.00%  0.00% top
    5 root      18    0     0K   29M syncer/0   0:21  0.00%  0.00% =
[ioflush]
  193 root       2    0   224K 1380K select/0   0:20  0.00%  0.00% =
telnetd
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
Info from the boot prom

CPU_#0         TI, TMS390Z50(3.x) 0Mb External Cache
CPU_#1         TI, TMS390Z50(3.x) 0Mb External Cache
(I have noticed an article stating that modules with no external cache =
might have=20
problems.Is it still an issue or it has been fixed?)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
At the continual reboots i was getting

nmi_hard: SMP botch
syncing disks... done
Call traceback:
pc =3D 0xf0258658 args =3D (0x0, 0x40400fe4, 0xf0002000, 0xf02ec400, =
0xf02dacd8,=20
0x0, 0xf02dac28) fp =3D 0xf02dac28
pc =3D 0xf011d5e4 args =3D (0x100, 0x0, 0xfe012000, 0xf031c400, =
0xf031c400,=20
0xf02a2800, 0xf643c000, 0xf02dac90) fp =3D 0xf02dac90

plus more.

Any idea ?