Hi,

I am trying to install NetBSD 1.6-RELEASE on a SPARCclassic.  It has one
internal and one external SCSI disk.  I'm netbooting the installer from a
FreeBSD/i386 machine.

During booting there are messages indicating that the kernel has found the
disks (see dmesg output below), however after I choose "Install NetBSD to
hard disk" from the installer menu I get the message "I can not find any hard
disks for use by NetBSD.  You will be returned to the original menu.".  I
have tried to read the disk labels from a shell with no luck:

# disklabel sd0
disklabel: ioctl DIOCGDINFO: Inappropriate ioctl for device
# disklabel sd1
disklabel: ioctl DIOCGDINFO: Inappropriate ioctl for device

The machine currently has Solaris 2.6 on it, which appears to boot fine
(i.e. the disks seem to be working).

I opened the box with the external drive in and from the model number
(Seagate ST11200N) it seems to be sd0 with sd1 presumably being the internal
drive.

Anyone have any idea what's wrong?

Thanks,

Francis


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (GENERIC) #0: Mon Sep  9 08:27:06 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/sparc/OBJ/autobuild/src/sys/arch/sparc/compile/GENERIC
total memory = 32352 KB
avail memory = 26420 KB
using 430 buffers containing 1720 KB of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/ledma@4,8400010/le@4,8c00000
mainbus0 (root): SUNW,SPARCclassic
cpu0 at mainbus0: TMS390S10 @ 50 MHz, on-chip FPU
cpu0: physical 4K instruction (32 b/l), 2K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08: hostid 80026a3f
timer0 at obio0 slot 0 offset 0xd00000: delay constant 23
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0: baud rate 1200 (console input)
ms0 at zs1 channel 1: baud rate 1200
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11 softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
iommu0 at mainbus0 addr 0x10000000: version 0x1/0x4, page-size 4096, range 64MB
sbus0 at iommu0: clock = 25 MHz
dma0 at sbus0 slot 4 offset 0x8400000: dma rev 2
esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
audioamd0 at sbus0 slot 4 offset 0x1300000 level 7 (ipl 13) softpri 4
audio0 at audioamd0: full duplex
bpp0 at sbus0 slot 4 offset 0xc800000 level 2 (ipl 3): dma rev 2
ledma0 at sbus0 slot 4 offset 0x8400010: dma rev 2
le0 at ledma0 slot 4 offset 0x8c00000 level 6: address 08:00:20:04:e5:3f
le0: 8 receive buffers, 2 transmit buffers
cgthree0 at sbus0 slot 3 offset 0x0 level 9: SUNW,501-1718, 1152 x 900 (console)
cgthree0: attached to /dev/fb
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <SEAGATE, ST11200N SUN1.05, 8808> SCSI2 0/direct fixed
sd0: 1005 MB, 1872 cyl, 15 head, 73 sec, 512 bytes/sect x 2059140 sectors
sd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers
sd1 at scsibus0 target 3 lun 0: <SEAGATE, ST1480   SUN0424, 8628> SCSI2 0/direct fixed
sd1: 411 MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sect x 843284 sectors
sd1: sync (200.0ns offset 15), 8-bit (5.000MB/s) transfers
Kernelized RAIDframe activated
root on le0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.1.1.42
nfs_boot: my_domain=repton.int
nfs_boot: my_addr=10.1.1.48
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=10.1.1.1
root on 10.1.1.42:/export/moon/root
root file system type: nfs
kbd0: code=0x7c with mod=0x4 produced unexpected keysym 0x8302
kbd0: code=0xfc with mod=0x4 produced unexpected keysym 0x8302
kbd0: input overrun
kbd0: code=0x7c with mod=0x4 produced unexpected keysym 0x8302
kbd0: code=0xfc with mod=0x4 produced unexpected keysym 0x8302