On Mon, May 06, 2002 at 07:35:23PM -0000, eeh@netbsd.org wrote:

> Can someone test out a quad ethernet card with the latest version
> of intr.c to see if the hang still occurs?

source from yesterday. hang just after hme4 - serial break did
nothing, had to hardware reset, so no debug...


NetBSD 1.6A (INSTALL) #0: Thu Jun  6 23:45:42 EST 2002
    grant@tinkerbell:/usr/obj/sys/arch/sparc64/compile/INSTALL
total memory = 256 MB
avail memory = 224 MB
using 1651 buffers containing 13208 KB of memory
bootpath: /pci@1f,0/pci@1,1/network@1,1
mainbus0 (root): SUNW,Ultra-5_10
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 333 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
intr_establish: intr reused 7c0
DVMA map: c0000000 to e0000000
IOTSB: 12ac000 to 132c000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
se at ebus0 addr 400000-40007f ipl 43 not configured
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80c0437a
flashprom at ebus0 addr 0-fffff not configured
SUNW,CS4231 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36 not configured
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:c0:43:7a
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ATI Technologies 3D Rage Pro (VGA display, revision 0x5c) at pci1 dev 2 function 0 not configured
pciide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using ivec 1820 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST39140A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 8693 MB, 17662 cyl, 16 head, 63 sec, 512 bytes/sect x 17803440 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to native-PCI mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 1 function 0: Intel product 0xb154 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 0 function 0 not configured
hme1 at pci3 dev 0 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ivec 3011
hme1: Ethernet address 08:00:20:c0:43:7a
ukphy0 at hme1 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 1 function 0 not configured
hme2 at pci3 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
intr_establish: intr reused 7d1
hme2: interrupting at ivec 3011
hme2: Ethernet address 08:00:20:c0:43:7a
ukphy1 at hme2 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 2 function 0 not configured
hme3 at pci3 dev 2 function 1: Sun Happy Meal Ethernet, rev. 1
intr_establish: intr reused 7d1
hme3: interrupting at ivec 3011
hme3: Ethernet address 08:00:20:c0:43:7a
ukphy2 at hme3 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0006b8, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci3 dev 3 function 0 not configured
hme4 at pci3 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1
intr_establish: intr reused 7d1