Hi,

I installed today a SS5 with netbsd 1.5ZA,

The problem is that qec dosen't work anymore, I give you the error message,
and the boot message.

I can however use le0 for network access, but this machine is going to be a router :(

Does somebody have any answer/fix

Rodolphe.

Here are the outputs...
akima# ifconfig qe0 192.168.31.46 netmask 255.255.255.240
cpu0: NMI: system interrupts: 40000000<VME=0,SBUS=0,ME>
qe0: tx dma sbus error ack
qe0: resetting...
akima# Mar 13 01:22:01 akima /netbsd: cpu0: NMI: system interrupts: 40000000<VME=0,SBUS=0,ME>
Mar 13 01:22:01 akima /netbsd: qe0: tx dma sbus error ack
Mar 13 01:22:01 akima /netbsd: qe0: resetting...
qe0: tx dma sbus error ack
qe0: resetting...
Mar 13 01:22:07 akima /netbsd: qe0: tx dma sbus error ack
Mar 13 01:22:07 akima /netbsd: qe0: resetting...
ifconfig qe0 down
akima# 


NetBSD 1.5ZA (GENERIC) #3: Sat Jan 26 15:50:07 MET 2002
    root@night-porter.duskware.de:/usr/src/sys/arch/sparc/compile/GENERIC
total memory = 65144 KB
avail memory = 56840 KB
using 839 buffers containing 3356 KB of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@3,0
mainbus0 (root): SUNW,SPARCstation-5
cpu0 at mainbus0: MB86904 @ 70 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08: hostid 8070dec4
timer0 at obio0 slot 0 offset 0xd00000 delay constant 33
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0: baud rate 1200
ms0 at zs1 channel 1: baud rate 1200
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11 softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 23.333 MHz
dma0 at sbus0 slot 5 offset 0x8400000: dma rev 2
esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
bpp0 at sbus0 slot 5 offset 0xc800000 level 2 (ipl 3): dma rev 2
ledma0 at sbus0 slot 5 offset 0x8400010: dma rev 2
le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 08:00:20:1c:7a:32
le0: 8 receive buffers, 2 transmit buffers
audiocs0 at sbus0 slot 4 offset 0xc000000 level 9: CS4231
audio0 at audiocs0: full duplex
power-management at sbus0 slot 4 offset 0xa000000 not configured
qec0 at sbus0 slot 3 offset 0x20000 level 4 (ipl 7): 128K memory
qe0 at qec0 slot 0 offset 0x0 rev 1 address 08:00:20:1c:7a:32
qe1 at qec0 slot 1 offset 0x0 rev 1 address 08:00:20:1c:7a:32
qe2 at qec0 slot 2 offset 0x0 rev 1 address 08:00:20:1c:7a:32
qe3 at qec0 slot 3 offset 0x0 rev 1 address 08:00:20:1c:7a:32
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 3 lun 0: <QUANTUM, ATLAS IV 9 WLS, 0B0B> SCSI3 0/direct fixed
sd0: 8761 MB, 13816 cyl, 4 head, 324 sec, 512 bytes/sect x 17942584 sectors
sd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 4 lun 0: <QUANTUM, LP240S GM240S01X, 6.3> SCSI2 0/direct fixed
sd1: 234 MB, 1818 cyl, 4 head, 65 sec, 512 bytes/sect x 479350 sectors
sd1: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs