Hi
 I am getting the following error when netbooting a SLC. From the archive,
it looks like the problem is due to the 4MB simms. I do not have the option
to put 16MB simms on this machine to get it to boot. A couple of messages
hint that maybe the boot from the boot-142.fs image might work.
Unfortunately, extracting the boot-142.fs, copying the boot only yielded
that "13c00 The file just loaded is intended for a different CPU type".
The boot.net file is dated Aug 29 15:04, 62000bytes boot.net


Here is as fas as I get:
PROM Checksum test
Context Reg Test
Segment Map Test
Sizing Memory
Page Map Test
Page Map Test
Memory Test
Mapping Interrupt & Memory Error Regs
Probing Memory Bank #: 1 2 3 4 5
Initializing Auxiliary Register
Installing Timer Interrupt Handler
Timing CPU Clock Speed
Reset/Initialize Keyboard
Initializing Video
Probing SBus Slot #: 0 1 2 3
Setting up Console Parameters
SPARCstation SLC, No keyboard.
ROM Rev. 1.4, 16 MB memory installed, Serial #7608510.
Ethernet address 8:0:20:74:18:be, Host ID: 547418be.


Reset/Initialize SCSI Adapter
Enabling Interrupts
Testing
Testing audio chip; listen for a beep
Synchronous Error Reg Test
Synchronous Virtual Address Reg Test
Asynchronous Error Reg Test
Asynchronous Virtual Address Reg Test
System Enable Reg Test
Memory Test
Cache Tag Memory Test
Cache Data Memory Test
Testing Complete
Turning on Cache
Probing Memory Bank #: 1 2 3 4 5
Scrub Memory and Set Mappings
Booting from: le(0,0,0)
13200 >> NetBSD/sparc Secondary Boot, Revision 1.9
>> (root@dora.int.purplei.com, Fri Aug 25 05:44:39 BST 2000)
Booting netbsd
Illegal Instruction
ok