I've been trying to netboot NetBSD-1.5_ALPHA2 on a sun 4/670 but it fails
after probing the scsi-busses is this a known problem?

/Petter

PS. i've added a console dump if anyone is interested :)

<#0> ok boot net -s
Resetting ... 
SPARCsystem 600MP Series (2 X CY605C), No Keyboard
ROM Rev. 2.5, 128 MB memory installed, Serial #4203852.
Ethernet address 8:0:20:11:18:9d, Host ID: 7140254c.


Rebooting with command: net -s                                        
Boot device: /iommu/sbus/lebuffer@f,40000/le@f,60000   File and args: -s
13200 
>> NetBSD/sparc Secondary Boot, Revision 1.9
>> (root@dora.int.purplei.com, Fri Aug 25 05:44:39 BST 2000)
Booting netbsd
Using BOOTPARAMS protocol: ip address: 130.240.16.150, hostname:
continuity.ludd.luth.se
root addr=130.240.16.3 path=/vol1/NetBSD/sparc/root
2375719+115740+235184 [68+153056+111917]=0x2ea80c
OBP version 3, revision 2.5 (plugin rev 2)
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5_ALPHA2 (GENERIC) #4: Wed Aug 30 04:29:24 BST 2000

root@dora.int.purplei.com:/files/transient/netbsd/src/sys/arch/sparc/compile/GENERIC
total memory = 127 MB
avail memory = 115 MB
using 896 buffers containing 6636 KB of memory
bootpath: /iommu0/sbus0/lebuffer@f,40000/le@f,60000
mainbus0 (root): SUNW,Sun 4/600
cpu0 at mainbus0: CY7C601/605 (v.c) @ 40 MHz, RT602 or WTL3171 FPU
cpu0: 64K byte write-back, 32 bytes/line, sw flush: cache enabled
cpu at mainbus0 not configured
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0x300000 delay constant 17
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty1 at zs0 channel 1 (console i/o)
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
audio at obio0 slot 0 offset 0x500000 level 13 not configured
leds at obio0 slot 0 offset 0x600000 not configured
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x1/0x0, page-size 4096,
range 64MB
sbus0 at iommu0: clock = 20 MHz
dma0 at sbus0 slot 15 offset 0x81000: rev esc
esp0 at dma0 slot 15 offset 0x80000 level 4: ESP200, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
lebuffer0 at sbus0 slot 15 offset 0x40000: 128K memory
le0 at lebuffer0 slot 15 offset 0x60000 level 6: address 08:00:20:11:18:9d
le0: 64 receive buffers, 16 transmit buffers
MMI,prestoserve at sbus0 slot 1 offset 0x80000 not configured
dma1 at sbus0 slot 2 offset 0x81000: rev esc
esp1 at dma1 slot 2 offset 0x80000 level 5: ESP200, 25MHz, SCSI ID 7
scsibus1 at esp1: 8 targets, 8 luns per target
lebuffer1 at sbus0 slot 2 offset 0x40000: 128K memory
le1 at lebuffer1 slot 2 offset 0x60000 level 7: address 08:00:20:11:18:9d
le1: 64 receive buffers, 16 transmit buffers
qec0 at sbus0 slot 3 offset 0x20000: 128K memory
be0 at qec0 slot 0 offset 0x0 level 4 (ipl 7) rev 1 address
08:00:20:11:18:9d
on-board transceiver at be0: 10baseT, 100baseTX, auto
sparcvme0 at iommu0: version 0x0
vme0 at sparcvme0
eccmemctl0 at mainbus0: version 0x0/0x0
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:1:0): max sync rate 5.00MB/s
sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST41600N SUN1.3G, 0040> SCSI2
0/direct fixed
sd0: 1307 MB, 2099 cyl, 17 head, 75 sec, 512 bytes/sect x 2676846 sectors
probe(esp0:2:0): max sync rate 5.00MB/s
sd1 at scsibus0 target 2 lun 0: <SEAGATE, ST41600N SUN1.3G, 0040> SCSI2
0/direct fixed
sd1: 1307 MB, 2099 cyl, 17 head, 75 sec, 512 bytes/sect x 2676846 sectors
probe(esp0:3:0): max sync rate 5.00MB/s
sd2 at scsibus0 target 3 lun 0: <SEAGATE, ST41600N SUN1.3G, 0040> SCSI2
0/direct fixed
sd2: 1307 MB, 2099 cyl, 17 head, 75 sec, 512 bytes/sect x 2676846 sectors
scsibus1: waiting 2 seconds for devices to settle...
root on le0
nfs_boot: trying RARP (and RPC/bootparam)
data fault: pc=0x15a78 addr=0x15a78
sfsr=167<PERR=0,LVL=1,AT=3,FT=1,FAV,OW>
panic: kernel fault
syncing disks... data fault: pc=0x15a78 addr=0x15a78
sfsr=167<PERR=0,LVL=1,AT=3,FT=1,FAV,OW>
panic: kernel fault
Frame pointer is at 0xf025b7f8
Call traceback:
  pc = 0xf01f0f20  args = (0x11001fe4, 0x11001fe4, 0xf00, 0x0, 0xf025b910,
0x119010e4, 0xf025b860) fp = 0xf025b860
  pc = 0xf005ea80  args = (0x104, 0x0, 0xf0292c00, 0x0, 0xf025b984,
0x119010e5, 0xf025b8c8) fp = 0xf025b8c8
  pc = 0xf01fec40  args = (0xf02453d8, 0x104, 0x15a78, 0xf025b990, 0x1e,
0x119010e6, 0xf025b930) fp = 0xf025b930
  pc = 0xf0008518  args = (0x0, 0x167, 0x15a78, 0xf025ba38, 0x1e, 0x2710,
0xf025b9d8) fp = 0xf025b9d8
  pc = 0xf0008a60  args = (0xf0688400, 0x15a78, 0xf01b95ec, 0xf026c668,
0xffff, 0x2710, 0xf025ba88) fp = 0xf025ba88
  pc = 0xf005ee88  args = (0x114010e1, 0xf0268e08, 0xf1124000, 0xf0290c00,
0x413, 0x2710, 0xf025bb38) fp = 0xf025bb38
  pc = 0xf01b40cc  args = (0xf025bc70, 0xfe000000, 0x809c4000, 0x2,
0xffff, 0x0, 0xf025bba0) fp = 0xf025bba0
  pc = 0xf0008a60  args = (0xf025bc70, 0xf01b4024, 0x0, 0x0, 0xf025bd08,
0x119010e3, 0xf025bc10) fp = 0xf025bc10
  pc = 0xf0081080  args = (0xf00, 0x11801fe4, 0x0, 0xfe012000, 0xf0292c00,
0x31, 0xf025bcc0) fp = 0xf025bcc0
  pc = 0xf01f0eec  args = (0xf0002000, 0xf0290948, 0xf0002000, 0xf0270800,
0xf025bdd8, 0x119010e5, 0xf025bd28) fp = 0xf025bd28
  pc = 0xf005ea80  args = (0x100, 0x0, 0xf0292c00, 0x0, 0xf025be4c,
0x119010e6, 0xf025bd90) fp = 0xf025bd90
  pc = 0xf01fec40  args = (0xf02453d8, 0x100, 0x15a78, 0xf025be58, 0x1e,
0x2710, 0xf025bdf8) fp = 0xf025bdf8
  pc = 0xf0008518  args = (0x0, 0x167, 0x15a78, 0xf025bf00, 0xffff,
0x2710, 0xf025bea0) fp = 0xf025bea0
  pc = 0xf0008a60  args = (0xf0688400, 0x15a78, 0xf025fc78, 0xf0016c64,
0x0, 0xf0290948, 0xf025bf50) fp = 0xf025bf50
  pc = 0xf012eff8  args = (0x235d55, 0x11, 0xf, 0xf0290948, 0x0, 0x0,
0xf025fc10) fp = 0xf025fc10
rebooting