> 
> OK, i've placed a set of kernels on the ftp server.  you'll need to
> use either the old 64 bit snapshot (last year), the new "all.tar.gz"
> in the "other" directory, or a 32 bit sparc install.  the new files
> are in:
> 	
> 	ftp.netbsd.org:/pub/NetBSD/arch/sparc64/pci
> 
> there is a README describing all the files.
> 
> 
> these kernels should work on ultra5/ultra10 and AXi machines.  would
> every one who tests them please email me the boot messages.

This is looking a lot better. It does not hang when I paste into a
serial console like the kernels in other/ did. Here is my boot output.
Note I'm using a locally compiled ofwboot with NETBOOT defined because
the one in pci/ still don't want to do net boots. Also I'm using a
serial console.

Thanks for all the hard work!

John
-- 
John Hay -- John.Hay@icomtek.csir.co.za



ok boot net netbsd -s
Boot device: /pci@1f,0/pci@1,1/network@1,1  File and args: netbsd -s
15600 >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.2
>> (jhay@umko.mikom.csir.co.za, Tue Jul 11 09:12:27 SAST 2000)
Using BOOTPARAMS protocol: ip address: 146.64.5.2, hostname: baracuda
root addr=146.64.5.1 path=/usr/home/diskless/baracuda
loadfile: reading header
elf64_exec: Booting /pci@1f,0/pci@1,1/network@1,1/netbsd
1965244@0xf1000000+180096@0xf1400000+359208@0xf142bf80 
symbols @ 0xfff36340 80+163344+87539 start=0xf1000000
chain: calling OF_chain(800000, ee88, f1000000, fffa9a80, 18)
[ using 251800 bytes of netbsd ELF symbol table ]
Our trap handler is enabled
consinit()
setting up stdin
stdin instance = fffe5728
setting up stdout
stdout instance = fffe53d8
stdout package = f0061cc8
console is unknown
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5B (POWEROFSEVEN64) #65: Tue Jul 11 16:19:05 EST 2000
    mrg@fish-dances.eterna.com.au:/home/current/src/sys/arch/sparc64/compile/POWEROFSEVEN64
total memory = 128 MB
avail memory = 88160 KB
using 832 buffers containing 32600 KB of memory
bootpath: /pci@1f,0/pci@1,1/network@1,1
mainbus0 (root): SUNW,Ultra-5_10
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 360 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 2048K external (64 b/l) 
psycho0 at mainbus0 addr 0xfffc4000
sabre: bus range 0 to 2; simba b, PCI bus 1; simba a, PCI bus 2
DVMA map: c0002000 to ffffe000
pci0 at psycho0
pci0: i/o space, memory space enabled
Sun Microsystems product 0x2000 (miscellaneous prehistoric) at pci0 dev 0 function 0 not configured
simba0 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at simba0 bus 2
pci1: i/o space, memory space enabled
simba1 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at simba1 bus 1
pci2: i/o space, memory space enabled
ebus0 at pci2 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003 addr 728000-728003 addr 72a000-72a003 addr 72c000-72c003 addr 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
se at ebus0 addr 400000-40007f ipl 43 not configured
su at ebus0 addr 3083f8-3083ff ipl 41 not configured
su at ebus0 addr 3062f8-3062ff ipl 42 not configured
lpt0 at ebus0 addr 3043bc-3043cb addr 30015c-30015d addr 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7 addr 706000-70600f addr 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59 (eeprom) hostid ffffffff80b55360
flashprom at ebus0 addr 0-fffff not configured
SUNW,CS4231 at ebus0 addr 200000-2000ff addr 702000-70200f addr 704000-70400f addr 722000-722003 ipl 35 ipl 36 not configured
hme0 at pci2 dev 1 function 1: address 08:00:20:b5:53:60
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: using vector 33 for interrupt
ATI Technologies Mach64 B (VGA display, revision 0x5c) at pci2 dev 2 function 0 not configured
pciide0 at pci2 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using vector 32 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST38420A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 8223 MB, 16708 cyl, 16 head, 63 sec, 512 bytes/sect x 16841664 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to native-PCI mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pcons0 at mainbus0
No counter-timer -- using %tick at 360MHz as system clock.
Using tick -- intr in 3600000 cycles...done.
root device: hme0
dump device: 
file system (default generic): 
root on hme0
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying nfs...
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=146.64.5.2 (RARP from 146.64.5.1)
nfs_boot: server_addr=146.64.5.1
nfs_boot: hostname=baracuda
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
root on 146.64.5.1:/usr/home/diskless/baracuda
root time: 0x396ac952
root file system type: nfs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
Enter pathname of shell or RETURN for sh: 
Terminal type is sun-ss5.
We recommend creating a non-root account and using su(1) for root access.
#