On Thu, 17 Feb 2000, David Brownlee wrote:

> 	What does dmesg report?

It reports that the things that don't work are configured.
Again, I'd be happy to test anything out to get this working,
  -- MW


NetBSD 1.4S (TADPOLE3GX) #0: Tue Feb 15 14:19:13 PST 2000
    mw@gizmotosh:/mnt/usr/src/sys/arch/sparc/compile/TADPOLE3GX
total memory = 65084 KB
avail memory = 58032 KB
using 839 buffers containing 3356 KB of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@4,8400000/esp@4,8800000/sd@1,0:g
mainbus0 (root): Tadpole_S3GX
cpu0 at mainbus0: MB86904 @ 110 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x202000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0xd00000 delay constant 52
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
auxio2 at obio0 slot 0 offset 0x910000 not configured
tctrl0 at obio0 slot 0 offset 0xd1000020 level 11
tctrl0: main power available, internal battery attached, external mouse attached
clk-ctrl at obio0 slot 0 offset 0x3c0000 not configured
com0 at obio0 slot 0 offset 0x3a0000 level 13: ns16550a, working fifo
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 22 MHz
pnozz0 at sbus0 slot 0 offset 0x8000000 level 2: rev 4, 800x600, depth 8 (console)
pnozz0: attached to /dev/fb
dma0 at sbus0 slot 4 offset 0x8400000: rev 2
esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
SUNW,bpp at sbus0 slot 4 offset 0xc800000 level 3 not configured
ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
le0 at ledma0 slot 4 offset 0x8c00000 level 6: address 00:00:83:ae:21:25
le0: 8 receive buffers, 2 transmit buffers
ts102 at sbus0 slot 1 offset 0x2000000 level 11 not configured
SUNW,DBRIs3 at sbus0 slot 2 offset 0x40 level 9 not configured
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:1:0): max sync rate 10.00Mb/s
sd0 at scsibus0 targ 1 lun 0: <CONNER, CFP1080S, 4649> SCSI2 0/direct fixed
sd0: 1030 MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sect x 2110812 sectors
probe(esp0:3:0): max sync rate 10.00Mb/s
sd1 at scsibus0 targ 3 lun 0: <IBM, DPRS-21215    !, S61B> SCSI2 0/direct fixed
sd1: 1160 MB, 2358 cyl, 16 head, 63 sec, 512 bytes/sect x 2376864 sectors
root on sd0g dumps on sd0b
root file system type: ffs