Subject: Re: NetBSD/sparc hardware support list
To: Erik E. Fair <fair@clock.org>
From: I presume I need no introduction. <greywolf@starwolf.starwolf.com>
List: port-sparc
Date: 06/17/1998 23:47:29
"Erik E. Fair" sez:
/*
 * Could each of you send me dmesg output after boot time for your systems,
 * and a list of what Sbus or VME cards are in your systems, and I'll try to
 * cross-reference these against the Sun hardware FAQ and put something nice
 * together.

Nothing fancy; straight up IPX 64MB mem.

The Antares (ATMI-*) card doesn't have a driver for it.

Yet.

NetBSD 1.3.2 (GENERIC_SCSI3) #0: Sun May 10 23:24:39 MEST 1998
    pk@flambard:/usr/src1/sys/arch/sparc/compile/GENERIC_SCSI3
real mem = 66871296
avail mem = 63582208
using 128 buffers containing 524288 bytes of memory
bootpath: /sbus@1,f8000000/esp@0,800000/sd@3,0
mainbus0 (root): SUNW,Sun 4/50
cpu0 at mainbus0: cache chip bug; trap page uncached: W8601/8701 or MB86903 @ 40 MHz, on-chip FPU
cpu0: 64K byte write-through, 32 bytes/line, hw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 delay constant 17
auxreg0 at mainbus0 ioaddr 0xf7400003
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
audioamd0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1+
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100A, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
probe(esp0:0:0): max sync rate 4.80Mb/s
sd3 at scsibus0 targ 0 lun 0: <IMPRIMIS, 94601-15, 4984> SCSI1 0/direct fixed
sd3: 989MB, 1931 cyl, 15 head, 69 sec, 512 bytes/sect x 2026965 sectors
probe(esp0:1:0): max sync rate 5.00Mb/s
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST1480   SUN0424, 7516> SCSI2 0/direct fixed
sd1: 411MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sect x 843284 sectors
probe(esp0:2:0): max sync rate 3.90Mb/s
sd2 at scsibus0 targ 2 lun 0: <MICROP, 1588-15MBSUN0669, SN0C> SCSI1 0/direct fixed
sd2: 639MB, 1632 cyl, 15 head, 53 sec, 512 bytes/sect x 1309735 sectors
probe(esp0:3:0): max sync rate 5.00Mb/s
sd0 at scsibus0 targ 3 lun 0: <SEAGATE, ST1480   SUN0424, 7516> SCSI2 0/direct fixed
sd0: 411MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sect x 843284 sectors
st0 at scsibus0 targ 4 lun 0: <EXABYTE, EXB-8200, 263H> SCSI1 1/sequential removable
st0: rogue, density code 0x0, variable blocks, write-enabled
cd0 at scsibus0 targ 6 lun 0: <SANYO, CRD-254S, 1.02> SCSI2 5/cdrom removable
le0 at sbus0 slot 0 offset 0xc00000 pri 5: address 08:00:20:1a:1f:e8
le0: 8 receive buffers, 2 transmit buffers
ATMI,20-050-0014 at sbus0 slot 1 offset 0x8000 not configured
cgsix0 at sbus0 slot 3 offset 0x0: SUNW,501-1672, 1152 x 900, rev 7 (console)
cgsix0: attached to /dev/fb
fdc0 at mainbus0 ioaddr 0xf7200000 pri 11, softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
root on sd0a dumps on sd0b

 * 
 *         yes, I'm volunteering,
 * 
 *         Erik <fair@clock.org>
 * 
 * 
 */





				--*greywolf;
--
Microsoft:  Living proof that Borg screw Ferengi.