The following is the dmesg output after booting the 1.3 miniroot from my
swap space....

NetBSD 1.3 (GENERIC_SCSI3) #0: Thu Jan  1 19:03:39 MET 1998
    pk@flambard:/usr/src1/sys/arch/sparc/compile/GENERIC_SCSI3
real mem = 25112576
avail mem = 22466560
using 128 buffers containing 524288 bytes of memory
bootpath: /sbus0/esp0/sd@1,0:b
mainbus0 (root): Sun 4/60
cpu0 at mainbus0: MB86900/1A or L64801 @ 20 MHz, WTL3170/2 FPU
cpu0: 64K byte write-through, 16 bytes/line, sw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 delay constant 7
auxreg0 at mainbus0 ioaddr 0xf7400000
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
fdc0 at mainbus0 ioaddr 0xf7200000 pri 11, softpri 4: chip 82072
audioamd0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 25 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd1 at scsibus0 targ 1 lun 0: <HP, C2490AFORMATION, 3314> SCSI2 0/direct fixed
sd1: 2033MB, 2630 cyl, 18 head, 87 sec, 512 bytes/sect x 4165272 sectors
le0 at sbus0 slot 0 offset 0xc00000 pri 5: address 08:00:20:0f:db:59
le0: 8 receive buffers, 2 transmit buffers
dma1 at sbus0 slot 1 offset 0x400000: rev 1
esp1 at sbus0 slot 1 offset 0x800000 pri 3: ESP100A, 25MHz, SCSI ID 7
scsibus1 at esp1: 8 targets
esp1: !TC [intr 10, stat 87, step 1] prevphase 6, resid 0
esp1: illegal command: 0x90 (state 4, phase 6, prevphase 6)
esp1: !TC [intr 10, stat 87, step 1] prevphase 6, resid 0
esp1: illegal command: 0x90 (state 4, phase 6, prevphase 6)
esp1: !TC [intr 10, stat 87, step 1] prevphase 6, resid 0
esp1: illegal command: 0x90 (state 4, phase 6, prevphase 6)
esp1: illegal command: 0x90 (state 4, phase 6, prevphase 6)
esp1: illegal command: 0x90 (state 4, phase 6, prevphase 6)
esp1: illegal command: 0x90 (state 4, phase 6, prevphase 6)
cgsix0 at sbus0 slot 2 offset 0x0: SUNW,501-1481, 1152 x 900, rev 2 (console)
cgsix0: attached to /dev/fb
root on sd1b dumps on sd1b
WARNING: clock gained 34 days -- CHECK AND RESET THE DATE!
root file system type: ffs



At 11:35 PM 2/5/98 +0100, you wrote:
>>  Loading the miniroot onto swap and booting to perform the upgrade
>> to 1.3 caused problems with identifying the tape drive.  I can be more
>> specific if this is a previously unreported problem.  I need (work related)
>> to access the tape so I can't go to 1.3 if it doesn't support the tape
>> drive.
>
>Please send the details to me.
>
>I've been working on the SCSI driver to fix possibly related problems
>that first became apparent on a 4/300. The exact error messages
>will tell if those fixes will apply to your problems as well.
>
>-pk
>
>


=============================================================================
Steven Grunza
voice:  (609) 234 - 5020 ext 3101
fax:    (609) 234 - 5242
e-mail: steveng@formail.formation.com