Subject: SPARC port: make depend fails on genassym
To: None <current-users@NetBSD.ORG>
From: Rob Healey <rhealey@MR.Net>
List: port-sparc
Date: 11/12/1997 21:21:28
Has anybody ever encountered a SPARCstation 2 that consistantly
blows up when running awk over the genassym.cf file during a
kernel make depend?
I've had this problem for quite a while, since 1.2, and assumed I had
somehow scrazzled the disk. I installed the
1111 NetBSD-1.3ALPHA tar.gz distribution from scratch tonight and tried
again and WHAM! same old problem. Any ideas? Do SS2's not run
awk correctly? This is a 100%, no mods, straight from the tar's
install on a freshly formatted disk trying to make the GENERIC
kernel off the 1111 src sup... B^(.
Other oddity is that "swapctl -l" command dumps core, "swapctl -s"
works...
dmesg below.
-Rob
NetBSD 1.3_ALPHA (GENERIC) #55: Tue Nov 11 13:32:30 PST 1997
root@atomic.clock.org:/usr/src/sys/arch/sparc/compile/GENERIC
real mem = 33468416
avail mem = 30711808
using 128 buffers containing 524288 bytes of memory
bootpath: /sbus0/esp@0,800000/sd@3,0
mainbus0 (root): SUNW,Sun 4/75
cpu0 at mainbus0: cache chip bug; trap page uncached: W8601/8701 or MB86903 @ 40
MHz, version 0x2 FPU
cpu0: 64K byte write-through, 32 bytes/line, hw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 delay constant 17
auxreg0 at mainbus0 ioaddr 0xf7400003
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zstty0 at zs0 channel 0 (console)
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
audioamd0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
le0 at sbus0 slot 0 offset 0xc00000 pri 5: address 08:00:20:0e:b9:96
le0: 8 receive buffers, 2 transmit buffers
dma0 at sbus0 slot 0 offset 0x400000: rev 1+
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100A, 20MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
probe(esp0:3:0): max sync rate 4.03Mb/s
sd0 at scsibus0 targ 3 lun 0: <QUANTUM, LIGHTNING 540S, 241E> SCSI2 0/direct fix
ed
sd0: 525MB, 3658 cyl, 3 head, 98 sec, 512 bytes/sect x 1075649 sectors
fdc0 at mainbus0 ioaddr 0xf7200000 pri 11, softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
root on sd0a dumps on sd0b
root file system type: ffs