A kernel built with MAXBSIZE=3D16384, and the nbuf throttle removed from thi=
s
morning's sup (Feb 27) seems to be happier. At least, I was able to get
that curses-netstat to compile and work as a preliminary test. I'll try a
build-the-world after my 05:30 sup this morning, and if that doesn't die in
some bizarre way, I'd say we have a viable work-around for whatever the
real problem is.

	Erik

dmesg:

NetBSD 1.2C (ATOMIC) #0: Thu Feb 27 22:09:28 PST 1997

fair@atomic.clock.org:/home/netbsd/current/src/sys/arch/sparc/compile/ATOMIC
real mem =3D 49889280
avail mem =3D 44822528
using 609 buffers containing 2494464 bytes of memory
bootpath:
/iommu@0,10000000/sbus@0,10001000/espdma@4,8400000/esp@4,8800000/sd@2,0
mainbus0 (root): SUNW,SPARCclassic
cpu0 at mainbus0: TI,TMS390S10 @ 50 MHz, on-chip FPU
cpu0: physical 4K instruction (32 b/l), 2K data (16 b/l) cache enabled
obio0 at mainbus0
clock0 at obio0 addr 0x71200000: mk48t08 (eeprom)
timer0 at obio0 addr 0x71d00000 delay constant 23
zs0 at obio0 addr 0x71100000 pri 12, softpri 6
zs0a: console i/o
zs1 at obio0 addr 0x71000000 pri 12, softpri 6
[slavioconfig at obio0] addr 0x71800000 not configured
auxreg0 at obio0 addr 0x71900000
power0 at obio0 addr 0x71910000
fdc0 at obio0 addr 0x71400000 pri 11, softpri 4: chip 82077
iommu0 at mainbus0 addr 0x10000000: version 1/4, page-size 4096, range 64MB
sbus0 at iommu0: clock =3D 25 MHz
dma0 at sbus0 slot 4 offset 0x8400000: rev 2
esp0 at dma0 slot 0x4 offset 0x8800000 pri 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 2 lun 0: <SEAGATE, ST42100, 7614> SCSI2 0/direct fixed
sd0: 1813MB, 2574 cyl, 15 head, 96 sec, 512 bytes/sec
sd1 at scsibus0 targ 3 lun 0: <CONNER, CP30200  SUN0207, 4544> SCSI2
0/direct fixed
sd1: 203MB, 2123 cyl, 4 head, 49 sec, 512 bytes/sec
audio0 at sbus0 slot 4 offset 0x1300000 pri 13, softpri 4
SUNW,bpp at sbus0 slot 4 offset 0xc800000 not configured
ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
le0 at ledma0 slot 0x4 offset 0x8c00000 pri 6: address 08:00:20:04:d3:67
le0: 8 receive buffers, 2 transmit buffers
dma1 at sbus0 slot 1 offset 0x81000: rev esc
esp1 at dma1 slot 0x1 offset 0x80000 pri 5: ESP200, 40MHz, SCSI ID 7
scsibus1 at esp1: 8 targets
cd0 at scsibus1 targ 6 lun 0: <SONY, CD-ROM CDU-8003A, 1.9a> SCSI2 5/cdrom
removable
lebuffer0 at sbus0 slot 1 offset 0x40000
le1 at lebuffer0 slot 0x1 offset 0x60000 pri 7: address 08:00:20:04:d3:67
le1: 64 receive buffers, 16 transmit buffers
cgthree0 at sbus0 slot 3 offset 0x0: SUNW,501-1718, 1152 x 900
root on sd0a swap on sd0b
root file system type: ffs